National Conferences

  • Pushpender Singh, Niranjan Pandit, Aminul Islam, Anup Kumar Keshri, Plasma sprayed graphene/carbon nanotube reinforced lanthanum-cerate hybrid composite coating., IIM- ATM 2022, Hyderabad, India, 13/16 November, 2022.
  • Aminul Islam, Biswajyoti Mukherjee, O. S. Asiq Rahman, Anup Kumar Keshri, “In-situ tensile testing of graphene nano platelets reinforced shroud plasma sprayed Nickel- Aluminium coating” Indian Institute of Metals (NMD-ATM), Kolkata November 14-16 2018, West Bengal
  • Rakesh Kumar, Ravi Kumar Singh, O. S. Asiq Rahman, Anup Kumar Keshri, “Role of graphene nano platelets reinforcement on mechanical properties of plasma sprayed Alumina-titania coating” Indian Institute of Metals (NMD-ATM), Kolkata November 14- 16 2018, West Bengal.
  • Rohit Gupta, Shreshtha Ranjan, Krishna Kant Pandey, Anup Kumar Keshri, “In-situ synthesis of Titanium nitride coatings by shroud-reactive plasma spraying” Indian Institute of Metals (NMD-ATM), Kolkata November 14-16 2018, West Bengal. ShreshthaRanjan, Rohit Gupta, Prashant Kumar, Anup Kumar Keshri, “High temperature tribological behaviour of titanium nitride coatings prepared by shroud-reactive plasma spraying” Indian Institute of Metals (NMD-ATM), Kolkata November 14-16 2018, West Bengal.
  • Biswajyoti Mukherjee, O.S Asiq Rahman, Sribalaji M, Anup Kumar Keshri, “Spark Plasma Sintering of Molybdenum Disilicide and Multi-Walled Carbon Nanotube Reinforced hafnium carbide Ceramic Composite” Indian Institute of Metals (NMD- ATM), Bits Pilani, Goa, November 11-14, 2017.
  • O.S Asiq Rahman, S.T Aruna, Rishi Raj, Anup Kumar Keshri “Wettability of Plasma Sprayed Cerium Oxide Coatings” Indian Institute of Metals (NMD-ATM), Bits Pilani,Goa, November 11-14, 2017
  • O.S Asiq Rahman, Biswajyoti Mukherjee, Sony Priyadershini, Anup Kumar Keshri, “Graphene Nanoplatelets Reinforced Plasma Sprayed Alumina Coating with Improved Mechanical Properties” International Conference on Nanotechnology, Ideas, Innovations and Initiatives (ICN: 31-2017), IIT Roorkee, December 6-8, 2017.
  • Rishow Kumar, Biswajyoti Mukherjee, Anup Kumar Keshri, “Graphene Nanoplatelets Reinforced Plasma Sprayed Alumina-Titania Coatings with Improved Mechanical and Wear Properties” Conference on Advanced Nanomaterial and Nanotechnology(ICANN- 2017), IIT Guwahati, December 18-21 2017
  • Swarnima Singh, Anup Kumar Keshri “Plasma Sprayed Graphene Nanoplatelets Reinforced Hydroxyapatite Coating with Enhanced Mechanical Properties” International Conference on Nanotechnology, Ideas, Innovations and Initiatives (ICN: 31-2017),IIT Roorkee, December 6-8 2017
  • Sony Priyadershini, O.S Asiq Rahman, Anup Kumar Keshri “Plasma Sprayed Graphene Nanoplatelets Reinforced Alumina Nanocomposite Coating with Improved Scratch Resistance” Conference on Advanced Nanomaterial and Nanotechnology (ICANN- 2017), IIT Guwahati, December 18-21 2017
  • Anup Kumar Keshri, “Comprehensive Process Maps for Synthesizing High Density Aluminum Oxide-Carbon Nanotube Coatings by Plasma Spraying for Improved Mechanical and Wear Properties”, International Conference on Functional Materials, September 07-10, 2016, Tirunelveli, India.
  • Anup Kumar Keshri, Jun Huang, Virendra Singh, Wonbong Choi, Sudipta Seal and Arvind Agarwal, “Synthesis of Al2O3 Coating Reinforced with In Situ Grown CNTs for Improved Fracture and Wear Resistance” Surface and Modification Technology- 2009 Chennai, Tamilnadu, India, Nov. 2-5, 2009

International Conferences

  • Pushpender Singh, Niranjan Pandit, Anup Kumar Keshri, Plasma sprayed graphene/carbon nanotube reinforced lanthanum-cerate hybrid composite coating., ECERS XVIII, Lyon, France, 02/06 July, 2023.
  • Biswajyoti Mukherjee, Rishow Singh, Aminul Islam, Anup Kumar Keshri, Graphene Nanoplatelets Reinforced Plasma Sprayed Alumina-Titania Coating with Improved Corrosion and Wear Resistance., CIMTEC 2018, Perugia, Italy, 04-08, 2018.
  • O.S. Asiq Rahman, Sony Priyadershini, Anup Kumar Keshri, “Wear Resistance of Plasma Sprayed Graphene Nanoplatelets Reinforced Alumina Coating in Dry and Wet Environment” 14th International Ceramics Congress (CIMTEC-2018), June 4-8 2018, Italy.
  • Anup Kumar Keshri “Investigation of High Temperature Mechanical Properties of Carbon Nanotube Reinforced Titanium Carbide Nanocomposites for Aerospace Applications” 10th Indo-German Frontiers of Engineering Symposium 2018, May 24-27, 2018, Potsdam, Germany
  • Biswajyoti Mukherjee, O.S Asiq Rahman, Sribalaji M, Anup Kumar Keshri, “Spark Plasma Sintering of Molybdenum Disilicide and Multi-Walled Carbon Nanotube Reinforced hafnium carbide Ceramic Composite” Indian Institute of Metals (NMD- ATM), Bits Pilani, Goa, November 11-14, 2017.
  • Sribalaji M, Biswajyoti Mukherjee, Anup Kumar Keshri, In-situ Formation of Two Dimensional Graphene Nanoribbon in Carbon Nanotube reinforced Titanium Carbide Composite and its Effect on Toughness, The 3rd International Conference on 2D Materials and Technology (ICON-2DMAT), Singapore, 11-14 December, 2017.
  • M. Sribalaji, Biswajyoti Mukherjee, Aminul Islam, Tapas Laha, Anup Kumar Keshri, “Synergistic Reinforcement of Tungsten Carbide and Carbon Nanotubes for Improving the Fracture Toughness of Titanium Carbide based Ultra High Temperature Ceramic”, 28th International Conference on Diamond and Carbon Related Materials, Gothenburg, Sweden, September 03-07, 2017.
  • Sribalaji M, Biswajyoti Mukherjee, Asiq Rahman O.S, Srinivasa Rao Bakshi, Anup Kumar Keshri, Spark Plasma Sintering Of Carbon Nanotube Reinforced Hafnium Carbide Composite, 5th International Conference on Materials Science and Engineering Technology, October 29-31, 2016, Tokyo, Japan
  • Anup Kumar Keshri and Arvind Agarwal, “Fracture Strength of Carbon Nanotube Reinforced Plasma Sprayed Aluminum Oxide Coating”International Conference on Composite Materials, Jan 30-31, 2015 Dubai, UAE.
  • Anup Kumar Keshri, DebrupaLahiri, Arvind Agarwal, “Nano-scratch Approach to Determine the Adhesion Strength of a Single Alumina/Alumina-CNT Splat with Substrate in Plasma Spraying”Houston Texas, October 17-21, 2010
  • Anup Kumar Keshri, Jun Huang, Wonbong Choi, and Arvind Agarwal, “Chemical Vapor Deposited Carbon Nanotubes Reinforced Aluminum Oxide Coating with Improved Fracture and wear resistance” International Conference & Exposition on Advanced Ceramics and Composites, Daytona, Florida, 25-28th Jan. 2010
  • Anup Kumar Keshri, Kantesh Balani, Tapas Laha, Srinivas Rao Bakshi, Arvind Agarwal, “Comparative Study of Carbon Nanotubes/Plasma Interaction during Various Thermal Spray Processes” Presented in International Thermal Spray Conference-2009 held in Las Vegas, Nevada, May 4-7, 2009
  • DebrupaLahiri, Ana Benaduce, FrancoisRouzaud, John Solomon, Anup Kumar Keshri, Lidia Kos, Arvind Agarwal, Investigation on Wear Resistance of Plasma Sprayed Hydroxyapatite-Carbon Nanotube Composite Coating on Orthopedic Implant and Cytotoxicity of Wear Debris, International Conference & Exposition on Advanced Ceramics and Composites,
  • Daytona, Florida, 25-28th Jan. 2010 Srinivas Rao Bakshi, Yao Chen, Anup Kumar Keshri, Graham McCartney, P. Shipway and Arvind Agarwal, “Wear Behavior of Aluminum/Aluminum-Silicon Composite Coatings Prepared by Cold Spraying” Presented in International Thermal Spray Conference-2009 held in Las Vegas, Nevada, May 4-7, 2009
  • Riken Patel, Anup Kumar Keshri, George Dulikravich, Arvind Agarwal, “An Experimental and Numerical Algorithm for Near Net Shape Forming of Thin Walled Ceramic Structures by Plasma Spraying” Presented in International Thermal Spray Conference-2009 held in Las Vegas, Nevada, May 4-7, 2009
  • Debrupa Lahiri, Sabnam Namin, Tanisha Richard, Anup Kumar Keshri, Srinivasa Rao Bakshi, Nicolaos Tsoukias, Arvind Agarwal, “Copolymer-Boron Nitride Nanotube Composite for Biodegradable Scaffold application”,25thSouthern Biomedical Engineering Conference-2009, Miami, May2009
  • Kantesh Balani, Anup Kumar Keshri, Arvind Agarwal, “Plasma Sprayed Aluminum Oxide-Carbon nanotube Composite Coatings with Improved Fracture Toughness and Wear Resistance” Sub-Micron and Nanostructured Ceramics-2009 held in Colorado Springs, Colorado, June 7-12, 2009
  • RikenPatel, Anup Kumar Keshri, George Dulikravich, Arvind Agarwal, “An Experimental and Numerical Algorithm for Near Net Shape Forming of Thin Walled Ceramic Structures by Plasma Spraying”, presented in US National Congress on Computational Mechanics - 2009 held in Columbus, Ohio, July 16-19, 2009
  • Debrupa Lahiri, Francois Rouzaud, Tanisha Richard, Anup Kumar Keshri, SrinivasaRaoBakshi, Lidia Kos and Arvind Agarwal, “Poly Lactide-Caprolactone Copolymer - Boron Nitride Nanotube: A Novel Polymer Composite for Biodegradable Scaffold Application”,International Conference on Mechanics of Biomaterials and Tissues,Clearwater Beach, Florida, USA December 13-17,2009
  • DebrupaLahiri, Virendra Singh, Anup Kumar Keshri, Sudipta Seal andArvind Agarwal, “Precipitation and Crystallization of Hydroxyapatite on Boron Nitride Nanotubes Immersed in Simulated Body Fluid, The Minerals, Metals & Materials Society (TMS) Conference, San Diego, California, USA, February 27 - March 3, 2011

Invited Talks

  • Development of Process Maps for Synthesizing High Density Aluminum Oxide-Carbon Nanotube Coatings by Plasma Spraying for Improved Mechanical and Wear Properties. 4th International Conference on Nanostructured Materials and Nanocomposites (ICNM 2017) on 10- 12 February, 2017 at Mahatma Gandhi University , Kottayam, Kerala.
  • Comprehensive Process Maps for Synthesizing High Density Aluminum Oxide-Carbon Nanotube Coatings by Plasma Spraying for Improved Mechanical and Wear Properties at Bharathiar University , Coimbatore, India.
  • Plasma Spray Nanocomposite Coating with Improved Wear Properties on May 29, 2017 at Satluj Jal Vidyut Nigam Limited, Shimla, India.
  • Plasma Spray Composite Coating with Improved Mechanical and Wear Properties on November 18 2016 at Tata Steel , Jamshedpur, India.
  • Nanoindentation and Nano-scratch Approach to Determine the Mechanical Properties of Plasma Sprayed Aluminum Oxide-Carbon Nanotube Splat (Invited talk to Academics) on November 2 2016 at Toyohashi University of Technology , Toyohashi, Aichi, Japan.
  • Plasma Sprayed Composite Coating with Improved Mechanical and Wear Properties (Invited talk to Industry)on 08 October, 2016 at Carborundum Universal Limited (CUMI) , Ernakulam, India.
  • Plasma sprayed composite coating with improved mechanical and wear properties(Invited talk to Academics) on September 07, 2016, Organized by department of Physics at NIT Surathkal , Mangalore, India.
  • Thermal Spray Coatings: Fundamentals, Properties and Applications (Invited talk to Academics) on September 06, 2016, Organized by Centre for Nanoscience and Technology, Pondicherry University (A Central University) at , Pondicherry, India.
  • Thermal Sprayed Coatings & Composites: Science, Engineering and Applications (TSCC- 2016) Co-Instructor on June 20-July 01, 2016, Organized by Global Initiative of Academic Networks (GIAN) at , MNIT Allahabad, India.
  • Thermal Spray Coatings: Fundamentals, Properties and Applications(Invited talk to Industry)on July 22, 2016 at Bharat Forge , Pune, India.

Publications

2023

  1. S Bhanuchandar, G Vinothkumar, P Arunkumar, M Sribalaji, Anup Kumar Keshri, K Suresh Babu. Unravelling the role of cationic Ni 2+ vacancies and Ni 3+  ions in non-stoichiometric NiO: breakdown of anti-ferromagnetic ordering and large exchange bias, Journal of Materials Science (2023), (IF: 4.72, h5 index: 200)
  2. Satish C, Kumar KV, Prasad S, Kiran PS, Rahman OA, Singh P, Indupuri S, Shrivastava R, Pandey SM, Keshri AK. Effect of Al2O3 and MoS2 reinforcement on microstructure, mechanical, and wear properties of plasma sprayed aluminium hybrid composite coating, Materials Today Communications (2023), (IF: 3.66, h5 index: 42) 104. Niranjan Pandit, Pushpender Singh, Mate Czagany, Szabolcs Hompoth, Zoltan Gacsi, Peter Baumli, Anup Kumar Keshri, Electrochemical Behavior of GNP/CNT Porous Composite for Supercapacitors, Chemical Physics Letters (2023) (IF: 2.719, h5 index: 44)
  3. Krishna Kant Pandey, Aminul Islam, Shubhendra Shivam Maurya, Bala Praveen Chakkravarthy Raghupathy, M. V. Sivakumaran, N Kavitha, Anup Kumar Keshri, Hybrid Reinforcement of 1-Dimensional and 2-Dimensional Carbon Nanofillers for Improving the Efficiency of Alumina Membranes, Surfaces and Interfaces (2023) (IF: 6.137, h5 index: 46)
  4. Shiven Ponnapureddy, Alok Bhadauria, Shipra Bajpai, Ashutosh Tiwari, Krishna Kant Pandey, Anup K Keshri, Kantesh Balani. Enhanced reliability with bimodal microstructure and transformation-induced toughening in Al2O3-YSZ based thermal barrier coatings, Surface and Coatings Technology 462 (2023): 129488. (IF: 4.865, h5 index: 66)
  5. Shubhangi Chourasia, SM Pandey, Anup Kumar Keshri. Prospects and Challenges with Legal Informatics and Legal Metrology Framework in the Context of Industry 6.0, MAPAN (2023): 1-26. (IF: 1.446, h5 index: 15)
  6. Atul Ranjan, Akash Priy, Israr Ahmad, Manabendra Pathak, Mohd Kaleem Khan, Anup Kumar Keshri. Heat Transfer Characteristics of Pool Boiling with Scalable Plasma-Sprayed Aluminum Coatings, Langmuir 39, no. 18 (2023): 6337-6354. (IF: 4.331, h5 index: 76)
  7. Rahul Davis, Abhishek Singh, Kishore Debnath, Anup Kumar Keshri, Paulo Soares, Luciane Sopchenski, Herman A Terryn, Ved Prakash. Surface modification of biodegradable Mg alloy by adapting µEDM capabilities with cryogenically-treated tool electrodes, The International Journal of Advanced Manufacturing Technology (2023): 1-20. (IF: 3.226, h5 index: 85)
  8. Alok Bhadauria, Shipra Bajpai, Ashutosh Tiwari, Shiva Kant Mishra, Ambreen Nisar, Shruti Dubey, Nishant Chavan, Anup K Keshri, Kantesh Balani. Bimodal microstructure toughens plasma sprayed Al 2 O 3 -8YSZ-CNT coatings, Ceramics International 49, no. 8 (2023): 12348-12359. (IF: 5.532, h5 index: 94)
  9. Swarnima Singh, Himanshu Rai, Krishna Kant Pandey, Anup Kumar Keshri, Nitya Nand Gosvami, Improving Tribological Properties of Al alloys via Robust One Step Graphene Coatings using Plasma Spraying, Tribology Letters (2023), doi.org/10.1007/s11249-023-01713-8
  10. Pushpender Singh, Aminul Islam, Niranjan Pandit, Satish Indupuri, OS Asiq Rahman, Shailesh Mani Pandey, and Anup Kumar Keshri. Plasma sprayed graphene/carbon nanotube reinforced lanthanum-cerate hybrid composite coating, Ceramics International 49, no. 7 (2023): 11167-11177. (IF: 5.532, h5 index: 94)
  11. Shubhendra Shivam Maurya, Krishna Kant Pandey, Swati Sharma, Sudha Kumari, Kamlesh Kumar Mirche, Deepak Kumar, Shailesh Mani Pandey, Anup Kumar Keshri, Microstructural, mechanical and tribological behavior of nanodiamonds reinforced plasma sprayed nickel-aluminum coating , Diamond and Related Materials (2023), doi.org/10.1016/j.diamond.2023.109714
  12. Kamlesh Kumar Mirche, Krishna Kant Pandey, Shailesh Mani Pandey, Anup Kumar Keshri, Microstructure and Corrosion Behavior of Plasma-Sprayed Nanodiamond- Reinforced NiAl Nanocomposite Coating, Journal of Thermal Spray Technology (2023), doi.org/10.1007/s11666-023-01558-6

2022

  1. Shahid Hussain, Zuber Ali Shah, Kazi Sabiruddin, Anup Kumar Keshri, Characterization and tribological behaviour of Indian clam seashell-derived hydroxyapatite coating applied on titanium alloy by plasma spray technique, Journal of the Mechanical Behavior of Biomedical Materials (2022), doi.org/10.1016/j.jmbbm.2022.105550
  2. Rahul Davis, Abhishek Singh, Kishore Debnath, Paulo Soares, Stephan Hennings Och, Anup Kumar Keshri, Luciane Sopchenski, Herman A Terryn,Enhanced abrasive- mixed-µ-EDM performance towards improved surface characteristics of biodegradable Mg AZ31B alloy, The International Journal of Advanced Manufacturing Technology (2022), doi.org/10.1007/s00170-022-10673-7
  3. Alok Bhadauria, Shipra Bajpai, Ashutosh Tiwari, Shiva Kant Mishra, Ambreen Nisar, Shruti Dubey, Nishant Chavan, Anup Kumar Keshri, Kantesh Balani,Bimodal microstructure toughens plasma sprayed Al2O3-8YSZ-CNT coatings, Ceramics International (2022), doi.org/10.1016/j.ceramint.2022.12.092
  4. Deepak Kumar, Krishna Kant Pandey, Sudha Kumari, Aakash M Nair, Kamlesh Kumar Mirche, Shubhendra Shivam Maurya, Shailesh Mani Pandey, Anup Kumar Keshri,Effect of nanodiamond concentration on the electrochemical behavior of plasma sprayed titanium-nanodiamond nanocomposite coatings, Diamond and Related Materials (2022), doi.org/10.1016/j.ceramint.2022.11.313
  5. Pushpender Singh, Aminul Islam, Niranjan Pandit, Satish Indupuri, OS Asiq Rahman, Shailesh Mani Pandey, Anup Kumar Keshri,Plasma sprayed graphene/carbon nanotube reinforced lanthanum-cerate hybrid composite coating, Ceramics International (2022), doi.org/10.1016/j.ceramint.2022.07.200
  6. Aminul Islam, Krishna Kant Pandey, Pushpender Singh, Rahul Kumar, Satya Gowtam Dommeti, Anup Kumar Keshri,Microstructural, mechanical and tribological properties of carbon nanotubes reinforced plasma sprayed molybdenum disulphide composite coatings, Ceramics International (2022), doi.org/10.1016/j.ceramint.2022.07.200
  7. Aminul Islam, Bala Praveen Chakkravarthy Raghupathy, MV Sivakumaran, Anup Kumar Keshri,Ceramic membrane for water filtration: Addressing the various concerns at once, Chemical Engineering Journal (2022), doi.org/10.1016/j.cej.2022.137386
  8. Sudha Kumari, Aminul Islam, Kamlesh Kumar Mirche, P Sai Kiran, Shubhendra Shivam Maurya, Deepak Kumar, Shailesh Mani Pandey, Anup Kumar Keshri,Plasma sprayed graphene reinforced titanium nitride composite coating: An effective solution for mitigating the corrosion attack, Surface and Coatings Technology (2022), doi.org/10.1016/j.surfcoat.2022.128704
  9. Pavan Bijalwan, Krishna Kant Pandey, S Sharma, Pushpender Singh, Atasi Dan, Atanu Banerjee, AN Bhagat, Anup Kumar Keshri,Single-step approach to tune the wettability of plasma sprayed crystalline and amorphous Fe-based coating, Surfaces and Interfaces (2022), DOI.org/10.1016/j.surfin.2022.101979
  10. Kanike Rajesh, Souvik Ghosh, Aminul Islam, Manoj Kumar Rangaswamy, Swati Haldar, Partha Roy, Anup Kumar Keshri, Debrupa Lahiri,Multilayered porous hydroxyapatite coating on Ti6Al4V implant with enhanced drug delivery and antimicrobial properties, Journal of Drug Delivery Science and Technology (2022), DOI.org/10.1016/j.jddst.2022.103155
  11. Aminul Islam, Akanksha Sharma, Pushpender Singh, Niranjan Pandit, Anup Kumar Keshri,Plasma-sprayed CeO2 overlay on YSZ thermal barrier coating: Solution for resisting molten CMAS infiltration, Ceramics International (2022), DOI.org/10.1016/j.ceramint.2022.01.352
  12. Krishna Kant Pandey, Pushpender Singh, Abhishek Pathak, Pavan Bijalwan, Monojit Dutta, Atanu Banerjee, Anup Kumar Keshri,Tailoring the Mechanical, Tribological and Corrosion Behavior of Fe-Based Metallic Glass Coating Synthesized Using Atmospheric Plasma Spraying, Journal of Thermal Spray Technology (2022), DOI.org/10.1007/s11666-022-01328-w
  13. Rahul Verma, Swati Sharma, Biswajyoti Mukherjee, Pushpender Singh, Aminul Islam, Anup Kumar Keshri,Microstructural, Mechanical and Marine Water Tribological properties of Plasma-Sprayed Graphene Nanoplatelets reinforced Al2O3-40 wt.% TiO2 Coating, Journal of the European Ceramic Society (2022), DOI.org/10.1016/j
  14. Rahul Davis, Abhishek Singh, Kishore Debnath, Roberta Maia Sabino, Ketul Popat, Paulo Soares, Anup Kumar Keshri, Bhaskar Borgohain,Enhanced Micro-Electric Discharge Machining-Induced Surface Modification on Biomedical Ti-6Al-4V Alloy, Journal of Manufacturing Science and Engineering (2022), DOI.org/10.1115/1.4053110
  15. Abhishek Pathak, Biswajyoti Mukherjee, Krishna Kant Pandey, Aminul Islam, Pavan Bijalwan, Monojit Dutta, Atanu Banerjee and Anup Kumar Keshri,Process–structure–property relationship for plasma-sprayed iron-based amorphous/crystalline composite coating, International Journal of Minerals, Metallurgy and Materials (2022), DOI.org/10.1007/s12613-020-2171-4

2021

  1. Swarnima Singh, Swati Sharma, Anup Kumar Keshri,Tribological Behaviour of Plasma-Sprayed Graphene Nanoplatelets Reinforced Hydroxyapatite Nanocomposite Coating, Transactions of the Indian Institute of Metals (2021), DOI:org/10.1007/s12666- 021-02367-7
  2. Krishna Kant Pandey, Dipak Kumar Shukla, Rahul Verma, Anup Kumar Keshri,Mechanical Property and Adhesion Strength of Carbon Nanofillers Reinforced Alumina Single Splats using In-situ Picoindentation and Nanoscratch Test, Ceramics International (2021), DOI:10.1016/j.ceramint. 2021.06.088
  3. Dipak Kumar Shukla, Biswajyoti Mukherjee, Aminul Islam, Anup Kumar Keshri,Peculiar high temperature tribological behaviour of plasma sprayed graphene nanoplatelets reinforced cerium oxide coatings, Ceramics International (2021), DOI:10.1016/j.ceramint.2021.03.096
  4. Sumit Choudhary, Aminul Islam, Biswajyoti Mukherjee, Anup Kumar Keshri,Plasma sprayed Lanthanum zirconate coating over additively manufactured carbon nanotube reinforced Ni-based Composite: Unique performance of thermal barrier coating system without bondcoat, Applied Surface Science(2021), DOI:10.1016/j.apsusc.2021.149397
  5. Aminul Islam, Biswajyoti Mukherjee, Krishna Kant Pandey, Anup Kumar Keshri,Ultra-Fast, Chemical-Free, Mass Production of High Quality Exfoliated Graphene, ACS Nano(2021), DOI: 10.1021/acsnano.0c09451

2020

  1. Krishna Kant Pandey, Swarnima Singh, Sumit Choudhary, Cheng Zhang, Arvind Agarwal, Lu Hua Li, Ying Chen, Anup Kumar Keshri,Microstructural and mechanical properties of plasma sprayed boron nitride nanotubes reinforced alumina coating, Ceramics International(2020), DOI: 10.1016/j.ceramint.2020.12.045
  2. Krishna Kant Pandey, Ravi Kumar Singh, OS Asiq Rahman, Sumit Choudhary, Rahul Verma, Anup Kumar Keshri, The Insulator-conductor transition in carbon nanotube and graphene nanoplatelates reinforced plasma sprayed alumina single splat: Experimental evidence by conductive atomic force microscopy, Ceramics International(2020), DOI: 10.1016/j.ceramint.2020.06.243
  3. OS Asiq Rahman, Biswajyoti Mukherjee, Sony Priyadershini, Madhu Ranjan Gunjan, Rishi Raj, ST Aruna, Anup Kumar Keshri, The Investigating the Wetting Phenomena and Fabrication of Sticky, Para-hydrophobic Cerium Oxide Coating, Journal of the European Ceramic Society(2020), DOI: 10.1016/j.jeurceramsoc.2020.06.028
  4. Swarnima Singh, Krishna Kant Pandey, Siva Kumar Bose, Anup Kumar Keshri, The Role of surface nanocrystallization on corrosion properties of low carbon steel during surface mechanical attrition treatment, Surface & Coatings Technology (2020), DOI: 10.1016/j.surfcoat.2020.125964
  5. Shreshtha Ranjan, Biswajyoti Mukherjee, Aminul Islam, Krishna Kant Pandey, Rohit Gupta, Anup Kumar Keshri, The “Microstructure, mechanical and high temperature tribological behaviour of graphene nanoplatelets reinforced plasma sprayed titanium nitride coating”, Journal of the European Ceramic Society (2020), DOI: 10.1016/j.jeurceramsoc.2019.10.043
  6. Swarnima Singh, Krishna Kant Pandey, Anup Kumar Keshri, The “Effect of Plasma Power on Corrosion Behaviour of Plasma Sprayed Hydroxyapatite Coatings”, Metals and Materials International (2020), DOI: 10.1007/s12540-020-00704-x
  7. Aarthi Uthayakumar, Arunkumar Pandiyan, Sribalaji Mathiyalagan,Anup Kumar Keshri, and Suresh Babu Krishna Moorthy, The Effect of Space Charge on Blocking Grain Boundary Resistance in Yttrium Doped Barium Zirconate Electrolyte for Solid Oxide Fuel Cells,  The Journal of Physical Chemistry C (2020), DOI: 10.1021/acs.jpcc.0c00166
  8. Swarnima Singh, Krishna Kant Pandey, O S Asiq Rahman, Swati Haldar, Debrupa Lahiri and Anup Kumar Keshri, “Investigation of crystallinity, mechanical properties, fracture toughness and cell proliferation in plasma sprayed graphene nano platelets reinforced hydroxyapatite coating”, Materials Research Express (2020), https://doi.org/10.1088/2053-1591/ab6c23
  9. Swarnima Singh, Krishna Kant Pandey, Aminul Islam, Anup Kumar Keshri,“Corrosion behaviour of plasma sprayed graphene nanoplatelets reinforced hydroxyapatite composite coatings in simulated body fluid” Ceramics International (2020)  doi.org/10.1016/j.ceramint.2020.02.139

2019

  1. Krishna Kant Pandey, Aminul Islam,  Rakesh Kumar,  Rahul Ghosh,  Venugopal Arjunan,  Anup Kumar Keshri, "Role of the Hybrid Addition of Carbon Nanotubes and Graphene Nanoplatelets on the Corrosion Behavior of Plasma‐Sprayed Aluminum Oxide Nanocomposite Coating" Advanced Engineering Materials (2019)
  2. Rakesh Kumar, Krishna Kant Pandey, Aminul Islam, Anup Kumar Keshri, "Graphene nanoplatelets: A promising corrosion inhibitor and toughening inclusion in plasma sprayed cerium oxide coating" Journal of Alloys and Compounds, 809, (2019), 1-10, (IF- 4.175, h5 index-73)
  3. Pavan Bijalwan, Krishna Kant Pandey, Biswajyoti Mukherjee, Aminul Islam, Abhishek Pathak, Monojit Dutta, Anup Kumar Keshri,"Tailoring the Bimodal Zone in Plasma Sprayed CNT Reinforced YSZ Coating and its Impact on Mechanical and Tribological Properties" Surface & Coatings Technology, 377, (2019) 124870 (IF-3.192, h5 index-52)
  4. Atul Ranjan, Aminul Islam, Manabendra Pathak, Mohd. Kaleem Khan, Anup Kumar Keshri,"Plasma sprayed copper coatings for improved surface and mechanical properties" Vacuum (2019) 168, 108834, (IF-2.515, h5 index-34)
  5. Biswajyoti Mukherjee, OS Asiq Rahman, Aminul Islam, Krishna Kant Pandey, Anup Kumar Keshri “Deposition of multi-scale thickness graphene coating by harnessing extreme heat and rapid quenching: Towards Commercialization”ACS Applied Materials and Interfaces 2019,11, (2019) 25500−25507(IF: 8.457, h5 index: 147)
  6. A Pathak, M Sribalaji, KK Pandey, P Bijalwan, M. Dutta, A. K Keshri “Microstructural Evolution and Fracture Toughness of Plasma Sprayed CNT Reinforced Yttria Stabilized Hafnia Coating” International Journal of Applied Ceramic Technology, 2019. https://doi.org/10.1111/ijac.13327 (IF: 1.074, h5 index: 24)
  7. Nitika Kundan, Biswajit Parida, Anup Kumar Keshri, Prathvi Raj Soni, “Synthesis and characterization of the nanostructured solid solution with extended solubility of graphite in nickel by mechanical alloying” International Journal of Minerals, Metallurgy, and Materials, 2019, 26, 1031–1037. (IF: 1.221, h5 index: 19)
  8. Rohit Gupta, Aminul Islam, Krishna Kant Pandey, Shreshtha Ranjan, Ravi Kumar Singh, Biswajyoti Mukherjee, Anup Kumar Keshri, “In-situ oxide-free titanium nitride coating by conventional plasma spraying with improved properties” Ceramics International, 45 (2019) 12590–12593
  9. O. S. Asiq Rahman, Biswajyoti Mukherjee, Aminul Islam, Anup Kumar Keshri, “Instant Tuning of Superhydrophilic to Robust Superhydrophobic and Self Cleaning Metallic Coating: Simple, Direct, One-Step and Scalable Technique. Accepted in ACS Applied Materials and Interface, 11, (2019) 4616–4624
  10. S. Bhanuchandara, P. Arun kumar, M. Sribalaji, Anup Kumar Keshri, K. Suresh Babu,“Controlled growth of Ni/NiO composite nanoparticles and its influence on exchange anisotropy and spin glass features” Journal of Alloys and Compounds, 780, (2019), 256-265
  11. Sony Priyadershini, O.S. Asiq Rahman, Krishna Kant Pandey, Anup Kumar Keshri, “Remarkable improvement in tribological behavior of plasma sprayed carbon nanotube and graphene nanoplatelates hybrid reinforced alumina nanocomposite coating”, Ceramics International, 45, (2019) 5768–5778
  12. Biswajyoti Mukherjee, Aminul Islam, Krishna Kant Pandey, O.S. Asiq Rahman, Rishow Kumar, Anup Kumar Keshri,“Impermeable CeO2 overlay for the protection of plasma sprayed YSZ thermal barrier coating from molten sulfate-vanadate salts”Surface and Coating Technology, 358 (2019) 235–246
  13. Aminul Islam. Kundan Kumar, Krishna Kant Pandey, Biswajyoti Mukherjee, O.S. Asiq Rahman, Anirban Chowdhury, Anup Kumar Keshri, “Exceptionally high fracture toughness of carbon nanotube reinforced plasma sprayed lanthanum zirconate coatings” Journal of Alloys and Compounds, 777 (2019), 1133-1144
  14. B. Mukherjee, R. Kumar, A. Islam, O. S. Asiq Rahman, Anup Kumar Keshri, “Evaluation of strength-ductility combination by in-situ tensile testing of graphene nano platelets reinforced shroud plasma sprayed Nickel-Aluminium coating”, Journal of Alloys and Compounds, 765(2019), 1082-1089

2018

  1. M. Sribalaji, Davinder Singh, Swarnima Singh, Aminul Islam,Mayank Kumar Pandey, B. Viswanath, Anup Kumar Keshri, “A New Insight on the Role of 1-D and 2-D Reinforcements in TiC during High Temperature Plastic Deformation”, Ceramics International, 44(2018), 18389-18399
  2. P. Arunkumar, U. Aarthi, M. Sribalaji, B. Mukherjee, Anup Kumar Keshri, Waqas Hassan Tanveer, Suk-Won Cha, K Suresh Babu, “Deposition rate dependent phase/mechanical property evolution in zirconia and ceria-zirconia thin film by EB-PVD technique”, Journal of Alloys and Compounds,  765(2018), 418-427
  3. M. Sribalaji, Aminul Islam, Biswajyoti Mukherjee, Mayank Kumar Pandey, Anup Kumar Keshri, “Tailoring the thermal shock resistance of titanium carbide by reinforcement with tungsten carbide and carbon nanotubes”, Ceramics International,  44 (2018), 2552-2562.
  4. O S Asiq Rahman, M Sribalaji, Biswajyoti Mukherjee, Tapas Laha, Anup Kumar Keshri, “Synergistic effect of hybrid carbon nanotube and graphene nanoplatelets reinforcement on processing, microstructure, interfacial stress and mechanical properties of Al2O3 nanocomposites”, Ceramics International, 44 (2018), 2109-2122.

2017

  1. Aminul Islam, Biswajyoti Mukherjee, M. Sribalaji, O.S. Asiq Rahman, P. Arun kumar, K. Suresh Babu, Anup Kumar Keshri,“Role of hybrid reinforcement of carbon nanotubes and graphene nanoplatelets on the electrical conductivity of plasma sprayed alumina coating”, Ceramics International, Available online 5 December 2017.
  2. Biswajyoti Mukherjee, Asiq Rahman O.S, Aminul Islam, Sribalaji M, Anup Kumar Keshri, “Plasma sprayed carbon nanotube and graphene nanoplatelets reinforced alumina hybrid composite coating with outstanding toughness”, Journal of Alloys and Compounds, 727 (2017), 658-670.
  3. P. Arunkumar, P Panda, M Sribalaji, R Ramaseshan, Anup Kumar Keshri, K S Babu, “Enhancing the oxygen ionic conductivity of (111) oriented Ce0.80Sm0.20O2-δ thin film through strain engineering”, Electrochimica Acta, 240 (2017), 437-446.
  4. M Sribalaji, Biswajyoti Mukherjee, Aminul Islam, Anup Kumar Keshri, “Microstructural and Mechanical Behavior of Spark Plasma Sintered Titanium Carbide with Hybrid Reinforcement of Tungsten Carbide and Carbon Nanotubes”, Materials Science and Engineering: A, 702 (2017), 10–21.
  5. M. Sribalaji, Biswajyoti Mukherjee, Srinivasa Rao Bakshi, P. Arunkumar, K. Suresh Babu, Anup Kumar Keshri,“In-situ formed graphene nanoribbon induced toughening and thermal shock resistance of spark plasma sintered carbon nanotube reinforced titanium carbide composite”, Composites Part B: Engineering 123 (2017) 227–240.

2016

  1. M. Sribalaji, O.S. Asiq Rahman, P. Arunkumar, K. Sureshbabu, Nitin P. Wasekar, G. Sundarajan, Anup Kumar Keshri,“Role of Silicon Carbide in Phase Evolution and Oxidation Behaviorof Pulse Electrodeposited Nickel-Tungsten Coating”, Metallurgical and Materials Transactions A, (2016) 1-12.
  2. Aarthi Uthayakumar, Arun kumar Pandiyan, Sribalaji Mathiyalagan, Ashutosh Kumar, Anup Kumar Keshri, Shobit Omar, Kantesh Balani, Suresh Babu Krishna Moorthy,“Interfacial Effect of Oxygen Ion Distribution on Conduction Mechanism in Strontium Added Ce0.8Sm0.2 O2-δ/Na2CO3 Nanocomposite”, The Journal of Physical Chemistry C, (2016)25068-25077
  3. Biswajyoti Mukherjee, O.S. Asiq Rahman, M. Sribalaji, Srinivasa Rao Bakshi, Anup Kumar Keshri,“Synergistic effect of carbon nanotube as sintering aid and toughening agent in spark plasma sintered molybdenum disilicide-hafnium carbide composite”, Materials Science and Engineering A, 678 (2016) 299-307
  4. U. Aarthi, P. Arunkumar, M. Sribalaji, Anup Kumar Keshri, K. Suresh Babu, “Strontium mediated modification of structure and ionic conductivity in samarium doped ceria/sodium carbonate nanocomposites as electrolytes for LTSOFC”, RSC Advances, 6 (2016) 84860-84870
  5. Anil Kumar, Asfak Ali Mollah, Anup Kumar Keshri, Manoj Kumar, Kulvir Singh, Krishna DuttVenkata Shiva Rallabhandi, and Raghunandan Seelaboyina "Development of Macroporous Silicone Rubber for Acoustic Applications" Industrial and Engineering Chemistry Research, 55 (2016), 8751−8760
  6. Anup Kumar Keshri, Lovish Behl, Debrupa Lahiri, George S. Dulikravich, Arvind Agarwal,"Dry Sliding Wear Behavior of Hafnium-Based Bulk Metallic Glass at Room and Elevated Temperatures", Journal of Materials Engineering and Performance 25 (2016) 3931-3937
  7. M. Sribalaji, O.S. AsiqRahman, Tapas Laha, Anup Kumar Keshri,"Nanoindentation and nanoscratch behaviour of electroless deposited nickel-phosphorus coating", Materials Chemistry and Physics, 177, (2016)
  8. O.S. Asiq Rahman, Nitin P. Wasekar, G. Sundararajan, Anup Kumar Keshri,"Experimental investigation of grain boundary misorientations and nanotwinning induced strengthening on addition of silicon carbide in pulse electrodeposited nickel tungsten composite coating" Materials Characterization,116, (2016), 1–7
  9. Swarnima Singh, M. Sribalaji, Nitin P. Wasekar, S. Joshi, G. Sundararajan, Raghuvir Singh, Anup Kumar Keshri,"Microstructural, Phase  evolution  and  corrosion  properties  of  silicon carbide  reinforced  pulse  electrodeposited  nickel–tungsten  composite coatings" Applied Surface Science, 364, (2016)

2015

  1. M. Sribalaji, P. Arunkumar, K. Suresh Babu, Anup Kumar Keshri, "Crystallization mechanism and corrosion property of electroless nickel phosphorus coating during intermediate temperature oxidation", Applied Surface Science, 355, (2015), 112-120
  2. Debrupa Lahiri, Jeffrey Karp, Anup Kumar. Keshri, Cheng Zhang, George S. Dulikravich, Laszlo J. Kecskes, Arvind Agarwal, “Scratch induced deformation behavior of hafnium based bulk metallic glass at multiple load scales”, Journal of Non-Crystalline Solids 410 (2015) 118–126

2014

2013

  1. Raghunandan Seelaboyina, Manoj Kumar, Alekhya Venkata Madiraju,  Kshitij Taneja, Anup Kumar Keshri, SarangMahajan, Kulvir Singh,“Microwave Synthesis of Copper Indium Gallium (di)Selenide (CIGS)  Nanopowders for Thin Film Solar Applications” J. Renewable and Sustainable Energy 5, (2013) 031608.
  2. NeelimaMahato, Samir Sharma, Anup Kumar Keshri, Amanda Simpson, Arvind Agarwal and Kantesh Balani,“Nanomechanical Properties and Thermal Conductivity of Plasma Sprayed Solid Oxide Fuel Cell Components: Ceria Doped Yttria Stabilized Zirconia Electrolyte";.JOM, 2013, DOI: 10.1007/s 11837-013-0601-8

Before 2013

  1. Anup Kumar Keshri and Arvind Agarwal,“Plasma Processing of Nanomaterials for Functional Applications- A Review” Nanoscience and Nanotechnology Letters, Vol. 4 (2012) 228-250 (Invited Review)
  2. Anup Kumar Keshri, Debrupa Lahiri and Arvind Agarwal “Carbon Nanotubes Improve the Adhesion Strength of Ceramic Splat to the Steel Substrate”, Carbon, Vol. 49 (2011) 4340-4347
  3. Anup Kumar Keshri, and Arvind Agarwal “Wear Behavior of Plasma Sprayed Carbon Nanotube Reinforced Aluminum Oxide Coating in Marine and High Temperature Environment” Journal of Thermal Spray Technology, Vol. 20 (2011) 1217-1230
  4. S. Ariharan, Ankur Gupta, Anup Kumar Keshri, Arvind Agarwal, Kantesh Balani1, “Size Effect of Yttria Stabilized Zirconia Addition on Fracture Toughness and Thermal Conductivity of Plasma Sprayed Aluminum Oxide Composite Coatings” Nanoscience and Nanotechnology Letters, Vol. 4 (2012) 323-332
  5. Anup Kumar Keshri, Debrupa Lahiri and Arvind Agarwal “Carbon Nanotubes Improve the Adhesion Strength of Ceramic Splat to the Steel Substrate”, Carbon, Vol. 49 (2011) 4340-4347
  6. Anup Kumar Keshri, and Arvind Agarwal “Wear Behavior of Plasma Sprayed Carbon Nanotube Reinforced Aluminum Oxide Coating in Marine and High Temperature Environment” Journal of Thermal Spray Technology, Vol. 20 (2011) 1217-1230
  7. Anup Kumar Keshri and Arvind Agarwal,“Splat Morphology of Plasma Sprayed Aluminum Oxide Reinforced with Carbon Nanotubes: A Comparison Between Experimental and Computational Modeling” Surface and Coatings Technology, Vol. 206 (2011) 338-347
  8. Anup Kumar Keshri, Jun Huang, Virendra Singh, Wonbong Choi, Sudipta Seal, and Arvind Agarwal,“Synthesis of Aluminum Oxide Coating with Carbon Nanotube Reinforcement Produced by Chemical Vapor Deposition for Improved Fracture and Wear Resistance”, Carbon  Vol. 48 (2010) 431-442
  9. Srinivasa R. Bakshi, Anup Kumar Keshri and Arvind Agarwal,“A comparison of mechanical and wear properties of plasma sprayed carbon nanotube reinforced aluminum composites at nano and macro scale” Materials Science and Engineering A, 528 (2011) 3375–3384
  10. Srinivas R. Bakshi, Vishal Musaramthota, David A. Virzi, Anup Kumar Keshri, Debrupa Lahiri,Virendra Singh, Sudipta Seal, Arvind Agarwal,“Spark plasma sintered tantalum carbide–carbon nanotube composite: Effect of pressure, carbon nanotube length and dispersion technique on microstructureand mechanical properties” Materials Science and Engineering A528 (2011) 2538-2547
  11. Ashish Singh, Srinivasa R. Bakshi, David A. Virzi, Anup Kumar Keshri, Arvind Agarwal, and Sandip P. Harimkar,“In-situ Synthesis of TiC/SiC/Ti3SiC2 Composite Coatings by Spark Plasma Sintering” Surface and Coatings Technology, 205(2011) 3840- 3846.
  12. Debrupa Lahiri, Virendra Singh, Anup Kumar Keshri, Sudipta Seal, Arvind Agarwal, “Apatite formability of Boron Nitride Nanotube” Nanotechnology, 22(2011) 205601.
  13. Kantesh Balani, Riken Patel, Anup Kumar Keshri, Debrupa Lahiri, Arvind Agarwal, “Multi-scale hierarchy of Chelydraserpentina: Microstructure and mechanical properties of turtle shell" Journal of the Mechanical Behavior of Biomedical materials, Vol. 4 (2011) 1440-1451
  14. DebrupaLahiri, Ana PaulaBenaduce, FrancoisRouzaud, John Solomon, Anup Kumar Keshri, Lidia Kos, Arvind Agarwal,“Wear Behavior and In-vitro Cytotoxicity of Wear Debris Generated from Hydroxyapatite-Carbon Nanotube Composite Coating” Journal of Biomedical Materials Research Part A , 96A (2011) 1-12.
  15. Anup Kumar Keshri, Jun Huang, Wonbong Choi, and Arvind Agarwal,“Intermediate Temperature Tribological Behavior of Carbon Nanotube Reinforced Plasma Sprayed Aluminum Oxide Coating”, Surface and Coatings Technology Vol. 204 (2010) 1847-1855
  16. Anup Kumar Keshri, Riken Patel, and Arvind Agarwala “Comprehensive Process Maps to Synthesize High Density Plasma Sprayed Aluminum Oxide Composite Coatings with Varying Carbon Nanotube Content”, Surface and Coatings Technology Vol. 205 (2010) 690-702
  17. Anup Kumar Keshri, KanteshBalani, SrinivasaRaoBakshi, Virendra Singh, Tapas Laha, Sudipta Seal and Arvind Agarwal,“Structural Transformation in Carbon Nanotubes During Thermal Spraying”, Surface and Coatings Technology Vol. 203 (2009) 2193-2201 (Ranked 5th among TOP 25 articles in Surface and Coatings Technology journal for April-June 2009)
  18. Anup Kumar Keshri, Srinivasa Rao Bakshi, Yao Chen, Tapas Laha, Xiao hua. Li, Cesar Levy and Arvind Agarwal,"Nanomechanical Behavior of Plasma Sprayed PZT Coatings”, Surface Engineering Vol. 25[4] (2009) 270-275
  19. Debrupa Lahiri, Francois Rouzaud, Tanisha Richard, Anup Kumar Keshri, Srinivasa Rao Bakshi, Lidia Kos and Arvind Agarwal,“Boron Nitride Nanotube Reinforced Polylactide-Polycaprolactone Copolymer Composite: Mechanical Properties and Cytocompatibility with Osteoblasts and Macrophages in vitro”Acta Biomaterialia 6 (2010) 3524-3533
  20. Debrupa Lahiri, Virendra Singh, Anup Kumar Keshri, Sudipta Seal and Arvind Agarwal,“Carbon nanotube toughened hydroxyapatite by spark plasma sintering: microstructural evolution and multi-scale tribological properties”, Carbon Vol. 48 (2010) 3103-3120
  21. Riken Patel, Anup Kumar Keshri, George S. Dulikravich, and Arvind Agarwal,“An Experimental and Numerical Algorithm for Near Net Shape Fabrication of Thin-Walled Ceramic Structures by Plasma  Spray Forming”, Journal of Materials Processing Technology Vol. 210 (2010) 1260-1269
  22. Debrupa Lahiri, Francois Rouzaud, Sabnam Namin, Anup Kumar Keshri, Nicolaos Tsoukias, Lidia. Kos, Arvind Agarwal,“Effect of CNT Addition in Polylactide- Caprolactone Copolymer on Mechanical Strengthening and  Interaction with Human Osteoblast Cells in- vitro” ACS Applied Materials and Interfaces Vol. 1 (2009) 2470- 2476
  23. Debrupa Lahiri, Anup Kumar Keshri, Srinivasa Rao Bakshi, Arvind Agarwal,“Dual Strengthening Mechanism Induced by Carbon Nanotube in Roll Bonded Aluminum Matrix Composite”, Materials Science and  Engineering A, Vol. 523 (2009) 263-270
  24. Srinivasa R. Bakshi, Yao Chen, Timothy Price, Deen Zhang, Anup Kumar Keshri, D. Graham McCartney, Phil Shipway and Arvind Agarwal,“Microstructure and Wear Properties of Aluminum/Aluminum-Silicon Composite Coatings Prepared by Cold Spraying”, Surface and Coatings Technology Vol. 204 (2009) 503-510
  25. Srinivasa R. Bakshi, Anup Kumar Keshri, Virendra Singh, Sudipta Seal, Arvind Agarwal,“Interface in Carbon Nanotube Reinforced Aluminum Silicon Composites: Thermodynamic Analysis and Experimental Verification”, Journal of Alloys and Compounds Vol. 481 (2009) 207-213
  26. Kantesh Balani, Anup Kumar Keshri, Debrupa Lahiri, Jorge E. Tercero and Arvind Agarwal, “Nano-scratching of Hydroxyapatite Reinforced with Aluminum Oxide and Carbon Nanotubes”, JOM, Vol. 61 (2009) 63-66
  27. Yao Chen, Shobit Omar, Anup Kumar Keshri, Kantesh Balani, Krishnamurthy Babu, Juan C Nino, Sudipta Seal and Arvind Agarwal,“Ionic conductivity of plasma-sprayed nanocrystalline yttria-stabilized zirconia electrolyte for solid oxide fuel cells” Scripta Materialia, 60 (2009) 1023–1026.
  28. Kantesh Balani, Sandip P. Harimkar, Anup K Keshri, Yao Chen, Narendra B. Dahotre and Arvind Agarwal, “Multiscale wear of plasma-sprayed carbon-nanotube-reinforced aluminum oxide nanocomposite coating” Acta Materialia, Vol. 56, (2008) 5984-5994.
  1. “Synthesis of CIS Nano-Ink and Its Absorber Layer withoutSelenization” Manoj Kumar, Raghunandan Seelaboyina*, Kshitij Taneja, AlekhyaVenkataMadiraju, Anup Kumar Keshri, Sarang Mahajan, Kulvir Singh. http://www.hindawi.com/cpis/energy/2013/739532/.
  2. “Synthesis of CZTS in aqueous media using microwave irradiation” Alekhya Venkata Madiraju, Kshitij Taneja, Manoj Kumar, Anup Kumar Keshri, Sarang Balkrushna Mahajan, Raghunandan Seelaboyina. http://www.hindawi.com/cpis/energy/2013/962730/.
  3. “Substrate Rotation Chemical Bath Deposition of Cadmium Sulfide Buffer Layers for Thin Film Solar Cell Application” Kshitij Taneja, Alekhya Venkata Madiraju, Manoj Kumar, Anup Kumar Keshri, Sarang Mahajan, Raghunandan Seelaboyina. http://www.hindawi.com/cpis/energy/2013/483628/.
  4. Xiaohua Li, Anup Kumar Keshri, ArvindAgarwal and C. Levy, “A Multifunctional MWCNT Strain Sensor: Sensing and Damping Characteristics”. NSTI-Nanotech 2009, ISBN 978-1- 4398-1782-7 Vol. 1 (2009) 484-487.
  5. Xiaohua Li, Cesar Levy, Ming Li, Anup Kumar Keshri, and Arvind Agarwal, “A Multifunctional MWCNT Composite: Strain Sensing, Damping and Application to Structural Vibration Control”, Paper IMECE2009-11599, Proceedings of the International Mechanical Engineering Congress and Exposition, Lake Buena Vista, FL, Nov. 2009.
  6. Anup Kumar Keshri, Paramanand Singh, and Uday Chakkingal “Effect of heat treatment on the characteristics of Cu-Al-Ni shape memory alloys”.Proc. International Conference on Heat Treatment, Jan 2004, Chennai, pp. A2, 1-5.
  7. Anup Kumar Keshri, Paramanand Singh, and Uday Chakkingal “Cu-Al-Ni as Smart Materials as an Automotive Applications”.Proc. International Conference on Transmat Expo-2004, Nov. 2004, Mumbai, pp 36-37
  8. Anup Kumar Keshri, Paramanand Singh, and Uday Chakkingal “Effect of compositions on Cu-Al-Ni shape memory alloys”. Proc. International Conference on International Symposium for Research Scholars, Dec 2004, Chennai. pp. 1-7.
  1. Arharan S, Rbia Hassan, Alok Bhadauria, Ashutosh Tiwari, Ritik Tandon, Anup Kumar Keshri, Kantesh Balani, Fundamentals of Thermal Spraying, CRC Press (2022), ISBN: 9781032344003
  2. Instant Tuning of Wettability of Metallic Coating Anup Kumar Keshri, Swati Sharma, Pages 32,CRC Press, 2021, eBook ISBN: 9781003213185
  3. Coatings for Energy Applications, Anup Kumar Keshri, M. Sribalaji, in “Thin Film Structures in Energy Applications” Editor Suresh Babu Krishna Moorthy, Springer International Publishing Switzerland 2015.Pages: 51-84, ISBN:978-3-319-14773-4
  1. P. Sai kiran, G; Satish, I; Islam, A; Keshri, A. K.: A method for preparing graphene- based membrane and the membrane prepared thereof. Submitted as: Indian Patent (Application No.: 202331025531, application date 19.05.2023)
  2. Satish, I; Rahul, K; Islam, A; Pandey, K. K; Sing, P; Keshri, A. K.: A method and a device for an oxide free aluminium nitride coating on a substrate. Submitted as: Indian Patent (Application No.: 202231075612, application date 26.12.2022)
  3. Aminul Islam, Anup Kumar Keshri, Bala Raghupathy, Sivakumaran M V, A DEVICE FOR FILTERING WATER AND METHOD OF FABRICATION THEREOF Submitted as: Indian Patent (Application No.: 202241014999 dated 18/03/2022 (Jointly with Carborundum Universal Limited)
  4. Bijalwan, P. K.; Banerjee, A.; Dan, A.; Pandey, K. K.; Keshri, A. K.: A method for depositing hydrophobic metallic coating on a substrate. Submitted as: Indian Patent (Application No.: 202131014777, application date 31.03.2021) (Jointly with Tata Steel Limited)
  5. Alok Bhadauria, Ashutosh Tiwari, Shipra Bajpai, Ambreen Nisar, Anup Kumar Keshri, Kantesh Balani, Bimodal structure based thermal barrier coating composition, process for preparation thereof, and substrate coated therewith Submitted as: Indian Patent (Application No.: 202111039562, application date 1.09.2021) (Jointly with IIT Kanpur)
  6. Anup Kumar Keshri, Pushpender Singh, Aminul Islam, Krishna Kant Pandey, Satya Gowtam Dommeti Plasma Sprayed Carbon Nanotube Reinforced Molybdenum Disulphide Anti-Friction Coating, Submitted as: Indian Patent (Application No.: 202111042583, application date: 20.09.2021) (Jointly with Naval Research Board (NRB), DRDO)
  7. Madiraju, A.V.; Taneja, K.; Seelaboyina, R.; Kumar, M.;Mahajan, S. B.; Keshri, A.K. (2019): Microwave synthesis of CZTS in aqueous media and preparation of printable inks for thin film solar application. Indian Patent (Patent No. 317841).
  8. Seelaboyina, R.; Madiraju, A.V.;Kumar, M.; Taneja, K.; Keshri, A.K.; Mahajan, S.; Singh, K. (2019): A Microwave assisted synthesis method to produce high dielectric constant perovskite structured CCTO powder in nano (20-100 nm) and micro (1-5 micron) form. Indian Patent (Patent No. 318023)
  9. Keshri, A. K.; Seelaboyina, R.; Kumar, M.; Mahajan, S.; Madiraju, A.V.; Taneja, K.; Singh, K.: A fabrication process for high strength wear resistance grinding rolls with enhanced performance and higher operational life. Submitted as: Indian Patent (Application No.: 479/Kol/2013, application date 29.04.2013).
  10. Taneja, K.; Madiraju, A.V.; Seelaboyina, R.; Kumar, M.;Mahajan, S.B.; Keshri, A. K.: A method of depositing a thin layer of semiconductor material by selective heating of a microwave absorbing substrate to reduce deposition time. Submitted as: Indian Patent (Application No. 485/Kol/2013, application date 29.04.2013).

Plasma Spray Coating Lab

Quick Links

GVP2+7F7, Bihta, Bihar 801106

+91-612-3028208

anup@iitp.ac.in

© 2023 PSCL. All Rights Reserved. Website by IPIX.