Patents
1. K. Awasthi, D.S.Reddy, M.K. Khan, High Concentration Fresnel Lens with Spherical Facets, Application filed with the Indian Patent Office, App. no.: 202031047971, Ref. No./Application Number: E-99/257/2020/KOL Date 03/11/2020, Status:Granted (Patent Number:502819)
2. S. Raj, A. Shukla, M. Pathak, M.K. Khan, Stepped Microchannel Heat Sink for Cooling an Electronic Device, Application filed with the Indian Patent Office, Serial Number 201931000706, Application no. E-1/747/2019/KOL, Date 07/01/2019, Status:Granted (Patent Number:506343)
3. D.S.Reddy, K. Awasthi, M.K. Khan, Curved Serpentine Flow Inverter, Application filed with the Indian Patent Office, App. no.: 201931031533, Ref. No./Application Number: E-137/2587/2019/KOL Date 31/07/2019, Status:Granted (Patent Number:508277)
Textbook
1. M.K. Khan, Fluid Mechanics and Machinery, Oxford University Press, 2015.
Book Chapters
1. A. Priy, I. Ahmad, M. Pathak , and M.K. Khan, 2024, Effects of Wettability on the Flow Boiling Heat Transfer Enhancement. In: Singh, K.M., Dutta, S., Subudhi, S., Singh, N.K. (eds) Fluid Mechanics and Fluid Power, Volume 1. FMFP 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. DOI: 10.1007/978-981-99-6074-3_70.
2. M. Hussain, M.K. Khan, and M. Pathak, 2024, Modelling of Phase Change Material Embedded Li-Ion Battery Pack Under Different Load Conditions Using Equivalent Circuit Model. In: Singh, K.M., Dutta, S., Subudhi, S., Singh, N.K. (eds) Fluid Mechanics and Fluid Power, Volume 1. FMFP 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. DOI: 10.1007/978-981-99-7827-4_30.
3. S.Pabi, M.K. Khan, A. Alexeev, T. Sulchek, and A. Raj, 2023, Chapter 4: Electroporation based drug delivery, Advanced Drug Delivery, Part of the Studies in Mechanobiology, Tissue Engineering and Biomaterials book series (SMTEB,volume 26), Springer. DOI: 10.1007/978-981-99-6564-9_4
4. A. Ranjan, M. Pathak, and M.K. Khan, 2023, Pool Boiling Heat Transfer of Hydrophobic Surfaces with Different Dynamic Wetting Characteristics. Fluid Mechanics and Fluid Power (Vol. 2), Lecture Notes in Mechanical Engineering, Springer. DOI: 10.1007/978-981-19-6970-6_84
5. Y. K. Prajapati, M. Pathak and M.K. Khan, 2017, Performance analysis of uniform and expanding cross-section microchannels for single phase and flow boiling heat transfer, Fluid Mechanics and Fluid Power - Contemporary Research, Springer, ISBN: 978-81-322-2741-0
6. M.K. Khan, Chapter 15: Refrigeration, Air Conditioning and Cold Storage, Handbook of Food Process Design, Wiley-Blackwell (UK), pp. 381-429, 2012.
Journal Publications
72. A. Priy, I. Ahmad, M.K. Khan, and M.Pathak, 2024, Bubble interaction and heat transfer characteristics of microchannel flow boiling with single and multiple cavities, ASME Journal of Thermal Sciences and Engineering Applications, Vol. 16(6), p.061010, DOI:10.1115/1.4065187
71. R. Gouda, A. Ranjan, M. Pathak, M.K. Khan, 2024, Combined Effect of Structured Surface and Biosurfactant in Pool Boiling Heat Transfer Enhancement, International Journal of Heat and Mass Transfer, Vol. 221, p.125102.DOI:10.1016/j.ijheatmasstransfer.2023.125102
70. B. Roy, D.S. Reddy, and M.K. Khan, 2024, Performance Investigation of a Solar Air Heater Artificially Roughened with Joukowski Airfoil Ribs, ASME Journal of Solar Energy Engineering, Vol. 146(1), 011004, DOI:10.1115/1.4062818.
69. S. Pabi, M.K. Khan, S.K. Jain, A.K Sen, and A.Raj, 2023, Effect of stenotic shapes and arterial wall elasticity on the hemodynamics, Physics of Fluids, Vol. 35, 101908, pp. 1-27, DOI: 10.1063/5.0169575.
68. I. Ahmad, A. Ranjan, M.Pathak, and M.K. Khan, 2023, Electrowetting-assisted pool boiling heat transfer characteristics under low gravity conditions, International Journal of Thermal Sciences, Vol. 192, Part B, p.108440, DOI:10.1016/j.ijthermalsci.2023.108440
67. M. Hussain, M.K. Khan, and M. Pathak, 2023, Thermal Analysis of Phase change material encapsulated Li-ion battery pack using multi-scale multi-dimensional framework, Journal of Energy Storage, Vol. 65, 107290, DOI:10.1016/j.est.2023.107290.
66. A. Ranjan, A. Priy, I. Ahmad, M. Pathak, M.K. Khan, and A. Keshri, 2023, Heat transfer characteristics of pool boiling with scalable plasma-sprayed aluminum coatings, Langmuir, Vol.39, pp.6337−6354, DOI:10.1021/acs.langmuir.2c03436.
65. R. Kumar, M.K. Khan, and M. Pathak, 2023, Efficient thermoelectric cooler for localized cooling in electronic devices, ASME Journal of Thermal Sciences and Engineering Applications, Vol. 15(8), p.081009, DOI:10.1115/1.4062333
64. A. Sharma and M.K. Khan, 2023, Heat transfer and flow characteristics of varying curvature wavy microchannels, International Journal of Thermal Sciences, Vol. 185, p.108096, DOI:10.1016/j.ijthermalsci.2022.108096
63. A. Ranjan, A. Priy, I. Ahmad, M. Pathak, M.K. Khan, 2023, Pool boiling heat transfer characteristics of a stepped microchannel structured heating surface, International Journal of Multiphase Flow, Vol. 160, p.104351, DOI:10.1016/j.ijmultiphaseflow.2022.104351
62. A. Priy, S. Raj, M.Pathak, and M.K. Khan, 2022, A hydrophobic porous substrate-based vapor venting technique for mitigating flow boiling instabilities in microchannel heat sink, Applied Thermal Engineering, vol. 216, 119138. DOI: 10.1016/j.applthermaleng.2022.119138
61. R. Kumar, R. Bhatt, A. Tewari, A.K. Debnath, P. Bhatt, N. Mani, P. Jha, P. Patro , S. Bhattacharya, M.Pathak, M.K. Khan, A. Singh, and K.P. Muthe, 2022, Synergistic Effect of Zn Doping on Thermoelectric Properties to Realize High Figure-of-merit and Conversion Efficiency in Bi2-xZnxTe3 Based Thermoelectric Generator, Journal of Materials Chemistry C, vol.10, p.7970. DOI:10.1039/d1tc06118f.
60. I. Ahmad, M.Pathak, and M.K. Khan, 2022, Transient Evolution of Electrowetting Induced Oscillating Droplets on Hydrophobic Substrates, Journal of Molecular Liquids, Vol. 353, 118704, DOI:10.1016/j.molliq.2022.118704
59. D.S. Reddy and M.K. Khan, 2022, Stationary Point Focus Solar Concentrators-A Review, International Journal of Energy Research, Vol. 46(5), pp.5678-5702,DOI:10.1002/er.7612
58. I. Ahmad, A. Ranjan, M.Pathak, and M.K. Khan, 2022, A Wettability-mediated Microdroplet under Electrowetting Effect for Hotspot Cooling, IEEE Transactions on Components, Packaging and Manufacturing Technology, DOI: 10.1109/TCPMT.2022.3143687
57. A. Ranjan, I. Ahmad, R. Gouda, M. Pathak, M.K. Khan, 2021, Enhancement of critical heat flux (CHF) in pool boiling with anodized copper surfaces, International Journal of Thermal Sciences vol.172,107338.DOI: 10.1016/j.ijthermalsci.2021.107338.
56. V. Kumar, M. Pathak, and M.K. Khan, 2021, Heat transfer characteristics of a closed-loop two phase thermosyphon system with a structured heating surface, ASME Journal of Thermal Science and Engineering Applications, vol. 14, 011013, DOI: 10.1115/1.4052812.
55. K. Awasthi, D.S. Reddy, and M.K. Khan, 2021, A Novel High Concentration Fresnel Lens as a Solar Concentrator, ASME Journal of Solar Energy Engineering, Vol. 144, 011006, pp. 1-15, DOI: 10.1115/1.4051975.
54. K. Awasthi, D.S. Reddy, and M.K. Khan, 2021, Performance Comparison Among the Variants of Curved Serpentine Coil, Physics of Fluids, Vol. 33, 073604, pp. 1-22, DOI: 10.1063/5.0056606
53. I. Ahmad, M.Pathak, and M.K. Khan 2021, Electrowetting induced microdroplet oscillation over interdigitated electrodes for hotspot cooling applications, Experimental Thermal and Fluid Science, vol. 125, 110372, pp. 1-10, DOI: 10.1016/j.expthermflusci.2021.110372.
52. D.S. Reddy, M.K. Khan,and K. Awasthi, 2020, Thermohydraulic Performance of a Novel Curved Serpentine Coil, Physics of Fluids, Vol. 32, 083609, pp. 1-24, DOI: 10.1063/5.0007469.
51. R. Gouda, M. Pathak and M.K. Khan, 2020, Pool boiling heat transfer characteristics of a biosurfactant particle deposited heating surface,International Journal of Heat and Mass Transfer, vol.163, 120455, pp.1-13
50. M. A. Hassan, M. Pathak, M.K. Khan and N.H. Khan, 2020, Natural convection of viscoplastic fluids in an enclosure with partially heated bottom wall, International Journal of Thermal Sciences, vol.158, 106527, pp.1-13.
49. S. Raj, M. Pathak and M.K. Khan, 2020, Flow boiling characteristics in different configurations of stepped microchannels, Experimental Thermal and Fluid Science vol. 119, 110217, pp.1-17.
48. R. Gouda, M. Pathak and M.K. Khan, 2020, A biosurfactant as prospective additive for pool boiling heat transfer enhancement,International Journal of Heat and Mass Transfer, vol.150, 119292, pp.1-13
47. S. Raj, M. Pathak and M.K. Khan, 2020, An improved mechanistic model for predicting bubble characteristic size in subcooled flow boiling, International Journal of Heat and Mass Transfer vol. 149, 119188, pp.1-11.
46. K. Awasthi, D.S. Reddy and M.K. Khan, 2020, Design of Fresnel lens with Spherical Facets for Concentrated Solar Power Applications, International Journal of Energy Research, vol. 44(1), pp. 460-472.
45. S. Raj, A. Shukla, M. Pathak and M.K. Khan, 2019, A Novel Stepped Microchannel for Performance Enhancement in Flow Boiling, International Journal of Heat and Mass Transfer, vol. 144, 118611, pp.1-14.
44. A. Ranjan, A. Islam, M. Pathak, M.K. Khan and A. Keshri, 2019, Plasma Sprayed Copper Coatings for Improved Surface and Mechanical Properties, Vacuum vol.168,108834, pp. 1-12.
43. S. Raj, M. Pathak and M.K. Khan, 2019, Effects of flow loop components in suppressing flow boiling instabilities in microchannel heat sinks, International Journal of Heat and Mass Transfer, vol.141, pp. 1238-1251.
42. D.S. Reddy and M.K. Khan, 2019, Design and Ray Tracing of Multifaceted Scheffler Reflector with Novel Crossbars, Solar Energy, vol.185, pp. 363-373.
41. B. Pandey, D.S. Reddy, M.K. Khan and M. Pathak, 2019,Standard Rating Charts for Low GWP Refrigerants Flowing Through Adiabatic Helical Capillary Tube, ASME Journal of Thermal Science and Engineering Applications vol. 11(5), 051015 pp.1-9.
40. K. Awasthi and M.K. Khan, 2019, Performance Evaluation of Coiled Tube Receiver Cavity for a Concentrating Collector, Renewable Energy, vol.138, pp. 666-674.
39. R. Gouda, M. Pathak and M.K. Khan, 2018, Pool boiling heat transfer enhancement with segmented finned microchannels structured surface,International Journal of Heat and Mass Transfer, vol.127, pp. 39-51.
38. D.S. Reddy, M.K. Khan, M.Z. Alam, and H. Rashid, 2018, Design charts for Scheffler reflector, Solar Energy, vol.163, pp.104-112.
37. S. Suman, M.K. Khan, M. Pathak, and R.N. Singh, 2018, Effects of hydrogen on thermal creep behaviour of Zircaloy fuel cladding, Journal of Nuclear Materials, vol.498, pp.20-32.
36. S. Suman, M.K. Khan, M. Pathak, and R.N. Singh, 2018, Effects of delta-hydride precipitated at a crack tip on crack instability in Zircaloy-4, International Journal of Energy Research, vol.42, pp. 284-292.
35. S. Suman, M.K. Khan, M. Pathak, and R.N. Singh, 2017, Investigation of elevated-temperature mechanical properties of delta-hydride precipitate in zircaloy-4 fuel cladding tubes using nanoindentation, Journal of Alloys and Compounds, vol.726, pp. 107-113.
34. Y. K. Prajapati, M. Pathak and M.K. Khan, 2017, Numerical investigation of subcooled flow boiling in segmented finned microchannels, International Communications in Heat and Mass Transfer, vol.86, pp. 215-221.
33. S. Suman, M.K. Khan, M. Pathak, and R.N. Singh, 2017, 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM, International Journal of Hydrogen Energy, vol. 42, pp.18668-18673.
32. D. S. Thakur, M.K. Khan and M. Pathak, 2017, Solar air heater with hyperbolic ribs: 3D simulation with experimental validation, Renewable Energy, vol.113, pp.357-368.
31. S. Raj, M. Pathak and M.K. Khan, 2017, An analytical model for predicting growth rate and departure diameter of a bubble in subcooled flow boiling,International Journal of Heat and Mass Transfer, vol.109, pp. 470-481.
30. D. S. Thakur, M.K. Khan and M. Pathak, 2017, Performance evaluation of solar air heater with novel hyperbolic rib geometry, Renewable Energy, vol.105, pp.786-797.
29. S. Suman, M.K. Khan, M. Pathak, and R.N. Singh, 2017, Effects of hydride on crack propagation in zircaloy-4, Procedia Engineering, vol. 173, pp. 1185-1190.
28. Y. K. Prajapati, M. Pathak and M.K. Khan, 2017, Bubble dynamics and flow boiling characteristics in three different microchannel configurations, International Journal of Thermal Sciences, vol.112, pp.371-382.
27. S. Suman, M.K. Khan, M. Pathak, R.N. Singh and J.K. Chakravartty, 2016, Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident, Nuclear Engineering and Design, vol. 307, pp. 319-327 (Appeared in the list of Most Downloaded Articles).
26. Y. K. Prajapati, M. Pathak and M.K. Khan, 2016, Transient heat transfer characteristics of segmented finned microchannels, Experimental Thermal and Fluid Science,vol.79, pp.134-142.
25. Y. K. Prajapati, M. Pathak and M.K. Khan, 2016, Clogging behaviour of elongated bubble in uniform and diverging microchannel, Proceedings of IMechE, Part C Journal of Mechanical Engineering Science, vol. 230(11),pp.1861-1875.
24. Y. K. Prajapati, M. Pathak and M.K. Khan, 2016, Transient analysis of microchannel heat sink during single phase and flow boiling conditions, Applied Mechanics and Materials, vol. 819, pp. 101-106.
23. M.A. Hassan, M.Pathak, M.K. Khan, 2015. Rayleigh-Benard Convection in Herschel-Bulkley fluid. Journal of Non-Newtonian Fluid Mechanics,vol. 226, pp. 32–45. (Appeared in the list of Most Downloaded Articles)
22. S.Suman, M.K. Khan, M.Pathak, 2015, Performance enhancement of solar collectors-a review, Renewable and Sustainable Energy Reviews, vol. 49, pp. 192-210.
21. S.Suman, M.K. Khan, M.Pathak, R.N. Singh and J.K. Chakravartty, 2015, Hydrogen in Zircaloy: Mechanism and its Impacts, International Journal of Hydrogen Energy, vol.40(17), pp.5976-5994.
20. M. A. Hassan, M. Pathak and M. K. Khan, 2015, Thermorheological Characterization of Elastoviscoplastic Carbopol Ultrez 20 Gel, ASME Journal of Engineering Materials and Technology, vol.137, pp.031002-1-8.
19. Y. K. Prajapati, M. Pathak and M.K. Khan, 2015, A comparative study of flow boiling heat transfer in three different configurations of microchannels, International Journal of Heat and Mass Transfer, vol.85, pp.711-722.
18. Y. K. Prajapati, M. Pathak and M.K. Khan, 2015, Computational fluid dynamics modeling of two-phase flow in an adiabatic capillary tube, ASME Journal of Thermal Science and Engineering Applications vol. 7, pp.011006-1-7.
17. M.K. Khan and M. Pathak 2014, Ballooning deformation of Zircaloy-4 fuel sheath, ASME Journal of Pressure Vessel Technology, vol. 136, pp. 031206-1-12.
16. Y.K. Prajapati, M.K.Khan, M. Pathak, 2014. Two-phase VOF model for the refrigerant flow through adiabatic capillary tube, ASHRAE Transactions,vol. 120, Part-1, pp. 60-67.
15. M.K.Khan, Pathak, M., S. Suman, S., A. Deo, R. Singh, 2014, Burst Investigation on Zircaloy-4 Claddings in Inert Environment, Annals of Nuclear Energy, vol. 69, pp.292-300.
14. M.K.Khan, M.Pathak, A.Deo, R. Singh, 2013, Burst Criterion for zircaloy-4 cladding in an inert environment, Nuclear Engineering and Design, vol. 265, pp. 886-894.
13. M.A.Hassan, M.Pathak, M.K.Khan,, 2013, Natural Convection of Viscoplastic Fluids in a Square Enclosure, ASME Journal of Heat Transfer, vol. 135, pp. 122501-1-12.
12. M. Pathak and M.K. Khan 2013, Inter-phase slip velocity and turbulence characteristics of micro-particles in an obstructed two-phase flow, Environmental Fluid Mechanics, vol. 13, pp. 371-388.
11. T. Alam, M.K.Khan, M. Pathak, K. Ravi, R. Singh,and S.K. Gupta, 2011, A Review on the Clad Failure Studies, Nuclear Engineering and Design, vol. 241(9), pp. 3658-3677. (Appeared in the list of Most Downloaded Articles)
10. M.K.Khan, 2010. Metastable Flow inside Capillary Tubes- A Critical Review, ASHRAE Transactions, vol. 116, Part-1, pp. 478-487
9. M.K. Khan, R. Kumar, P.K. Sahoo, 2009, Performance Prediction of Adiabatic Capillary Tubes by Conventional and ANN approaches- A Comparison, ASHRAE Transactions, vol. 115, Part-1, pp. 93-105.
8. M.K. Khan, R. Kumar, P.K. Sahoo, 2009, Experimental Investigation on the Flow of R-134a through Adiabatic and Diabatic Capillary Tubes, ASHRAE Transactions, vol. 115, Part-1, pp. 82-92.
7. M.K. Khan, R. Kumar, P.K. Sahoo, 2009, Flow Characteristics of Refrigerants Flowing through Capillary Tubes - A Review, Applied Thermal Engineering, vol. 29(8-9), pp. 1426-1439.
6. M.K. Khan, R. Kumar, P.K. Sahoo, 2009, Experimental Investigation on Diabatic Flow of R-134a Through Spiral Capillary Tube, International Journal of Refrigeration, vol. 32(2), pp. 261-271.
5. M.K. Khan, R. Kumar, P.K. Sahoo, 2008, Experimental and Numerical Investigation of the Flow of R-134a Through Lateral Type Diabatic Capillary Tube, HVAC&R Research, vol. 14, issue 6, pp. 871-904.
4. M.K. Khan, R. Kumar, P.K. Sahoo, 2008, Experimental Study of the Flow of R-134a through an Adiabatic Helically Coiled Capillary Tube, HVAC&R Research, vol. 14(5), pp. 749-762.
3. M.K. Khan, R. Kumar, P.K. Sahoo, 2008, An Experimental Study of the Flow of R-134a inside an Adiabatic Spirally Coiled Capillary Tube, International Journal of Refrigeration, vol. 31(6), pp. 970-978.
2. M.K. Khan, R. Kumar, P.K. Sahoo, 2008, A Homogenous Flow Model for Adiabatic Helical Capillary Tube, ASHRAE Transactions, vol. 114, Part 1, pp. 239-249.
1. M.K. Khan, R. Kumar, P.K. Sahoo, 2007, Flow Characteristics of Refrigerants Flowing inside an Adiabatic Spiral Capillary Tube, HVAC&R Research, vol. 13(5), pp. 731-748.
Conference Publications-Abroad
20. M. Hussain, M.K. Khan, M.Pathak, 2023, A novel immersion cooling technique for thermal management of high energy Lithium-ion batteries, 14th International Conference on Computational Heat and Mass Transfer (ICCHMT-2023), 04 - 08 September 2023, University of Applied Sciences Dusseldorf, Germany.
19. R. Gouda, M.Pathak, M.K. Khan 2020, Enhancement of Pool Boiling Heat Transfer Performance by an EcoFriendly Surfactant,5th World Congress on Momentum, Heat and Mass Transfer (MHMT'20), October 14 - 16, 2020, virtual, online.
18. K. Awasthi, D.S.Reddy, and M.K. Khan 2020, Design of Fresnel Lens With Constant Height Spherical Facets, ASME 2020 14th International Conference on Energy Sustainability (ES-2020), June 17-18, 2020, Virtual, online, V001T02A008,DOI: 10.1115/ES2020-1652.
17. D.S.Reddy, M.K. Khan 2018, A simplified frame design for Scheffler Reflector, 11th International Conference on Sustainable Energy & Environmental Protection (SEEP-2018),8-11 May 2018, UWS Paisley Campus, Scotland, United Kingdom.
16. K. Awasthi, M.K. Khan 2018, Performance evaluation of coiled tube receiver cavity for a concentrating collector, 11th International Conference on Sustainable Energy & Environmental Protection (SEEP-2018),8-11 May 2018, UWS Paisley Campus, Scotland, United Kingdom.
15. S.Raj, M.Pathak, M.K. Khan 2018, A novel impinged surface for pool boiling heat transfer enhancement, 10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT-2018), at Nagasaki, Japan, 12-15 March 2018.
14. R. Gouda, M.Pathak, M.K. Khan 2018, Flow Instability and CHF Characteristics in Segmented Finned Microchannels, 10th International Conference on Boiling and Condensation Heat Transfer (ICBCHT-2018), at Nagasaki, Japan, 12-15 March 2018.
13. S.Suman, M.K. Khan, M.Pathak and R.N. Singh 2017, 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM, 5th International Conference on Energy Engineering & Enivronmental Engineering (ICEEEE-2017), at Xiamen, China, 15-16 April 2017.
12. S.Suman, M.K. Khan, M.Pathak and R.N. Singh 2016, Effects of Hydrogen on Thermal Creep of Zircaloy, 5th International Conference on Nuclear and Renewable Energy Resources, Hefei, Anhui, China, 18-21 September 2016.
11. S.Suman, M.K. Khan, M.Pathak and R.N. Singh,2016 Numerical Simulation of Influence of Precipitated Hydride on Crack Propagation in Zircaloy Fuel Cladding, 5th International Conference on Nuclear and Renewable Energy Resources, Hefei, Anhui, China, 18-21 September 2016.
10. D.S. Thakur, M.K. Khan and M. Pathak 2016, Parametric study of a solar air heater with different rib geometries, 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, (HEFAT-2016), Costa del Sol, Spain, 11-13 July 2016.
9. Y.K. Prajapati, M. Pathak and M.K. Khan, 2014, Transient Analysis of Microchannel Heat Sink during Single Phase and Flow Boiling Conditions, 7th International Meeting on Advances in Thermofluids, Kuala Lumpur, Malaysia, Novemebr 26-27.
8. Y. K. Prajapati, M. Pathak and M.K. Khan 2014, A Comparative study of subcooled flow boiling in uniform, diverging cross-section and segmented finned microchannels, ASME 2014 12th International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM-2014) Chicago, Illinois, USA, August 3-7.
7. Prajapati, Y., Khan M.K., Pathak, M., 2014. Two-Phase VOF Model for the Refrigerant Flow through Adiabatic Capillary Tube (NY-14-005), ASHRAE Winter Conference, New York, NY, January 18-22, 2014.
6. Hassan, M.A., Pathak, M., Khan, M.K.., 2013, Natural convection of viscoplastic fluids in an enclosure with localized heating and symmetrical cooling, ASME 2013 Summer Heat Transfer Conference (HT-2013), Minneapolis, USA.
5. Khan, M.K., 2010. Metastable Flow inside Capillary Tubes: A Critical Review, ASHRAE Winter Conference, January 23-27, 2010, Orlando, FL, USA.
4. Khan, M.K., Kumar, R., Sahoo, P.K., 2009. Performance Prediction of Adiabatic Capillary Tubes by Conventional and ANN approaches- A Comparison, ASHRAE Winter Conference, January , 2009, Chicago, IL, USA.
3. Khan, M.K., Kumar, R., Sahoo, P.K., 2009. Experimental Investigation on the Flow of R-134a through Adiabatic and Diabatic Capillary Tubes, ASHRAE Winter Conference, January, 2009, Chicago, IL, USA.
2. Khan, M.K., Kumar, R., Sahoo, P.K., 2008. A Homogenous Flow Model for Adiabatic Helical Capillary Tube, ASHRAE Winter Conference, January, 2008 New York, NY, USA.
1. Khan, M.K., Sahoo, P.K., Kumar, R., Flow characteristics of HFC-134a in an adiabatic helical capillary tube, 5th International conference on Heat transfer, Fluid Mechanics and Thermodynamics HEFAT, 1-4 July 2007,Sun City, South Africa.
Conference Publications-India
45. M. Hussain, M.K. Khan, and M. Pathak, 2023, Numerical investigation on the porous electrode design and thermal management of a lithium-ion battery pack, 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023.
44. S. Pabi, M.K. Khan, and A. Raj, 2023, Effect of Womersley number on the hemodynamics of a stenotic carotid artery with heat generation, 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023.
43. Piyusha Jha, M. Hussain, M.K. Khan, 2023, Numerical evaluation of indirect liquid cooling of a Li-ion battery, 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023.
42. M.D. Eqbal, A. Priy, P. Kumar, M.Pathak, and M.K. Khan, 2023, Flow boiling heat transfer enhancement through vapor venting technique in an open microchannel heat sink , 27th National and 5th International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2023),IIT Patna, 14-17 December 2023.
41. M. Hussain, M.K. Khan, and M. Pathak, 2022, Modelling of Phase Change Material embedded Li-ion battery pack under different load conditions using Equivalent Circuit Model, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP-2022), IIT Roorkee, 14-16 December 2022.
40. S. Pabi, M.K. Khan, and A. Raj, 2022, Numerical investigation of the pulsatile flow of non-Newtonian biofluid through a rigid stenosed channel, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP-2022), IIT Roorkee, 14-16 December 2022.
39. A. Priy, I. Ahmad, M.Pathak, and M.K. Khan, 2022, Effects of wettability on the flow boiling heat transfer enhancement, 9th International and 49th National Conference on Fluid Mechanics and Fluid Power (FMFP-2022), IIT Roorkee, 14-16 December 2022.
38. M. Hussain, M.K. Khan, and M. Pathak, 2022, Numerical Investigation of Li-ion battery pack with PCM based cooling using Equivalent Circuit Model, 1st International conference on Advances in Heat Transfer and Fluid Dynamics (AHTFD-2022), AMU Aligarh, 1-3 December 2022.
37. A. Priy, M.Pathak, and M.K. Khan, 2022, Flow boiling characteristics of bio-surfactant in open microchannel heat sinks, 1st International conference on Advances in Heat Transfer and Fluid Dynamics (AHTFD-2022), AMU Aligarh, 1-3 December 2022..
36. S.Sagar, M.K. Khan, M. Pathak, S. Banerjee, T. Sawarn, S.K. Yadav, and R.N. Singh, 2022, High temperature oxidation of pre-oxidized Zircaloy-4 cladding tube, International Conference on Characterization and Quality Control of Nuclear Fuels (CQCNF-2022),NFC Hyderabad, 17-19 November 2022.
35. A. Priy, M.Pathak, and M.K. Khan, 2022, Flow boiling heat transfer characteritics of eco-frienndly surfact in microchannel heat sinks, International Chemical Engineering Conference (IChEC-2022), IIT Patna, 12-13 November 2022.
34. D.S. Reddy, M.K. Khan, M.Z. Alam and H. Rashid, 2019, Scheffler reflector based solar water heater with Archimedean spiral coil absorber, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31 December 2019.
33. K. Awasthi, D.S. Reddy,M.K. Khan, S. Dubey and V. Rawat, Simplified design methodology for truncated compound parabolic concentrator, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31 December 2019.
32. R. K. Gouda, M. Pathak and M.K. Khan, 2019, Combined Effects of Structured Surfaces and Surfactant in Pool Boiling Heat Transfer Enhancement, 25th National and 3rd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31 December 2019.
31. K. Awasthi and M.K. Khan 2018, Thermohydraulic Performance of Single Stage and Multistage Conical Receiver Cavities, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
30. V. Kumar, M. Pathak and M.K. Khan 2018, Enhancement of a Closed Loop Two Phase Thermosyphon at High Heat Flux, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
29. R. Kumar, M. Pathak and M.K. Khan 2018, Transient Simulation of a Three Dimensional Single Pair of Thermoelectric Cooler, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
28. A. Ranjan, M. Pathak and M.K. Khan 2018, Pool Boiling Heat Transfer Characteristics of a Plasma Sprayed Coated Surface, 7th International and 45th National Conference on Fluid Mechanics and Fluid Power, IIT Bombay, India 10-12 December 2018.
27. I. Ahmad, M.Pathak, M.K. Khan 2017, Numerical investigation of microfluidic transport based on electrowetting of dielectric, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), at BITS Pilani, Hyderabad, 27-30 December 2017.
26. S. Raj, M.Pathak, M.K. Khan 2017, A comparative study of subcooled flow boiling in uniform and segmented finned microchannel, 24th National and 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), at BITS Pilani, Hyderabad, 27-30 December 2017.
25. R. Gouda, M.Pathak, M.K. Khan 2017, Experimental Investigation of Pool Boiling Heat Transfer in Smooth and Enhanced Surfaces, Fluid Mechanics and Fluid Power (FMFP-2017), at Amrita University, Amritapuri, 14-16 December 2017.
24. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Effects of Hydrogen on Thermal Creep Behaviour of Zircaloy, 3rd Indo-Austrian Symposium on 'Advances in Materials Engineering' (AME 2016), IIT Bombay, Mumbai, 19-20 December 2016.
23. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Influence of the Crack-tip Hydride on Fracture Parameters of Zircaloy-4, International Conference on Advanced Materials (SCICON-16), Amrita University, Coimbatore, 19-21 December 2016.
22. S. Raj, M. Pathak and M.K. Khan 2016, Prediction of Bubble Lift-off Diameter in Sub-Cooled Flow Boiling, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016.
21. D.S. Thakur, M.K. Khan and M. Pathak 2016, 3D CFD Simulation of Solar Air Heater Artificially Roughened with Novel Hyperbolic Ribs, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016.
20. I Ahmad, M. Pathak and M.K. Khan 2016, Natural Convection in a Square Enclosure with Transpiration and Ventilation Port, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016.
19. S. Gore, M. Pathak and M.K. Khan 2016, Heat transfer Enhancement of Phase Change Material (PCM) with Nanoparticle for Thermal Storage System, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016.
18. A. Ranjan, R Gauda, M. Pathak and M.K. Khan 2016, A Review on Bubble Growth, Departure Diameter and Release Frequency in Pool Boiling, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016.
17. Y. K. Prajapati, M. Pathak and M.K. Khan 2016, Flow Visualization Study of Reverse Flow Phenomenon in Microchannel, 6th International and 43rd National Conference on Fluid Mechanics and Fluid Power, Motilal Nehru National Institute of Technology Allahabad, India 15-17 December 2016.
16. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Understanding Influence of Hydride Precipitated at a Crack Tip on Crack Propagation in Zircaloy-4 Fuel Cladding using XFEM, IISc Bangalore, Bengaluru, 11-15 December 2016.
15. S. Suman, M.K. Khan, M. Pathak and R.N. Singh 2016, Effects of hydride on crack propagation in zircaloy-4, 11th International Symposium on Plasticity and Impact Mechanics (IMPLAST 2016) IIT Delhi, New Delhi, 11-14 December 2016.
14. S. Raj, M. Pathak and M.K. Khan 2016, Prediction of Bubble Departure Diameter in Subcooled Flow Boiling, 2nd International Conference on Thermal Energy and Environment, (INCOTEE 2016), India
13.I. Ahmad, M. Pathak and M. K. Khan 2016, Investigation of Natural Convection in a Differentially Heated Room with Ventilation and Transpiration Port, Global Conference on Renewable Energy (GCRE-2016), NIT Patna, India
12. D.S. Thakur, M.K. Khan and M. Pathak 2016, Parametric Investigation of Artificially Roughened Solar Air Heater with Parabolic Rib Geometry, Global Conference on Renewable Energy (GCRE-2016), NIT Patna, India
11. Y.K. Prajapati, M. Pathak and M.K. Khan, 2015, Investigation of Flow Boiling Heat Transfer in Segmented finned Microchannels, 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2015), ISRO Trivandrum, India
10. M. A. Hassan, M. Pathak and M. K. Khan, 2015, Thermal instabilities in convection of viscoplastic fluids, 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC2015), ISRO Trivandrum, India
9. Y.K. Prajapati, M. Pathak and M.K. Khan, 2014, Performance Analysis of Uniform and Expanding Cross-section Microchannels in Single Phase and Flow boiling Heat Transfer, 5th International and 41st National Conference on Fluid Mechanics and Fluid Power, IIT Kanpur, Kanpur, India, December, 12-14
8. Y. K. Prajapati, M. Pathak, M. K. Khan, 2014, Experimental and numerical analysis of microchannel heat sink, Proceedings of International mechanical engineering congress, NIT Tiruchirappalli, India, June 12-15.
7. Y. K. Prajapati, M. Pathak and M.K. Khan 2013, Effects of surface wettability and cross section area on the evolution of an elongated bubble in a microchannel, 40th National Conference on Fluid Mechanics and Fluid Power, NIT Hamirpur, India.
6. Y. K. Prajapati, M. Pathak and M.K. Khan 2013, Numerical investigation of refrigerant flow through adiabatic capillary tube, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India
5. M. A. Hassan, M. Pathak and M. K. Khan, 2013, Convection heat transfer of yield stress fluids in an enclosure with eccentrically heated bottom wall, 22nd National and 11th International ISHMT-ASME Heat and Mass Transfer Conference, IIT Kharagpur, India
4. Hassan, M.A., Pathak, M., Khan, M.K.., 2013, Natural convection of yield stress fluids in a square enclosure with differentially heated side walls, 2nd National Conference on Advances in Heat Transfer and Fluid Dynamics, Aligarh, India.
3. M. A. Hassan, M. Pathak and M. K. Khan, 2012, Natural convection of viscoplastic fluids in a square enclosure with localized heating from below and symmetrical cooling from sides, SERC School & Sixth National Symposium on Rheology of Complex Fluids, Guwahati, India
2. M.K. Khan ,R. Kumar, P.K. Sahoo, Experimental investigation on the performance of R-134a flowing through a straight capillary tube under adiabatic and diabatic flow conditions, 19th National & 8th ISHMT - ASME Heat and Mass Transfer Conference January 3-5, 2008, JNTU, Hyderabad, India.
1. Khan, M.K. , Kumar, R., Sahoo, P.K., An Experimental Investigation on Straight and Coiled Adiabatic Capillary Tubes, National Conference of Refrigeration and Air Conditioning (NCRAC), January 8-10, 2009, IIT Madras, India.