 |
Mayank Tiwari
Professor Ph.D 1998 Nonlinear Dynamics of Ball bearings IIT Delhi Ph: +91 6115 233 116 mayankt[*AT]iitp.ac.in This email address is being protected from spambots. You need JavaScript enabled to view it.
|
Personal Webpage |
https://vidwan.inflibnet.ac.in/profile/49420 https://in.linkedin.com/in/mayank-tiwari-3301268 https://scholar.google.co.in/citations?user=Jrzxbw0AAAAJ&view_op=list_works&sortby=pubdate |
Research Areas/Areas of Interest |
Machine Dynamics- Rotor Dynamics, Acoustics, Tribology- Rolling sliding, Fretting and Vacuum Tribology |
Other Interests |
Ergonomics, Innovation and Entrepreneurship |
Courses taught at IITP |
Machine Design, Control Systems, Dynamics of Machinery, Vehicle Dynamics, Rotor Dynamics, Measurement and Instrumentation, Sensors and Actuators, BTech Software Laboratory |
No. of PhD Students |
Graduated-
- Dr B Venkatesham (2008) co-supervised Acoustics of HVAC systems
- Dr DK Prajapati (2019) Surface Failures for Rolling Sliding motion
Ongoing- 06 in the area of Rotor dynamics, Mechatronics, Fretting and Rolling-Sliding Friction
|
Professional Experience |
- Associate Professor IIT Patna since 2013
- GE Research & Development 2001 to 2011
- Mechanical Engineer
- Lead Engineer
- Senior Engineer
- GE Aviation, Engineering Manager Engine Dynamics 2011-2013
- Postdoctoral Visiting Research Scholar, Acoustics and Dynamics Laboratory, Mechanical Engineering Dept. The Ohio State University USA 1999-2001
- IIT Delhi 1991-1998
- Senior Research Assistant
- Project Associate
- Tata Motors (TELCO) Jamshedpur1987-1989 Graduate Engineer Trainee
|
Administrative experience |
- Coordinator Sponsored Research Industrial Relations Unit IIT Patna
- Coordinator Department of Mechanical Engineering IIT Patna
- Associate Dean R&D IIT Patna
- Chairman Faculty and Staff Grievance Redressal Committee IIT Patna
- Chairman House Allotment Committee
- First President Institute Innovation Council of MHRD, IIT Patna
- Lead Faculty for setup of Incubation Centre
- Chairman, Member of committees for setting up, construction and Startup Proposal Evaluation of Incubation Center, IIT Patna
- Senate Nominee Board of Governors IIT Patna
|
Projects |
Sl. No. |
Projects |
Title of Project |
Amount of grant Rs Lakhs |
Period |
Co-investigator (If any) |
1 |
UAY MHRD and GE India Pvt. Limited |
Development of Novel SMA Bearing Support and Retrofit for Enhanced Performances and Durability of Rotating Machinery |
182 |
2018 to 2021 |
Prinicpal Investigator Dr Mayank Tiwari Co- PI’s Prof S Srinvasan Department of Applied Mechanics IIT Madras Dr Akhilendra Singh IIT Patna |
2 |
ARDB Propulsion Panel Government of India |
Design of an Integral Squeeze Film Damper |
36.41 |
2017 to 2020 |
Principal Investigator Dr Mayank Tiwari Co-PI Dr Akhilendra Singh |
3 |
Swacchta Action Plan MHRD |
Development of Low Cost, Efficient Mechanism for Collection of Garbage and Dirt for Municipal Corporations, Panchayat, |
16 |
2018 to 2021 |
Principal Investigator Dr Mayank Tiwari Co-PI Dr Atul Thakur |
4 |
IMPRINT II SERB & National Bearing Company Pvt. Ltd. Jaipur |
Development of low friction rolling element bearings for enhanced Reliability and Efficiency Funding Agency |
63 |
2019-2022 |
Principal Investigator Dr Mayank Tiwari Co-PI Dr Surajit Paul |
5 |
Projects for GE in the area of Medical X-Ray tubes, Wind Turbine Bearings and Gear boxes ~$2 million |
|
Laboratory Setup |
1.)Tribology Lab- a.)Rolling Sliding twin disk TE74 S Phoenix UK. b.)RTec USA Univeral Oscillatory, Fretting and Tribocorrosion setup with Optical Prfilometer c.)DUCOM Pin on Disc
2.) UAY Rotating Machinery Lab
|
Patents |
- PR Subramaniam, E Hidding, MJ Burkett, SB Johnson, M Tiwari Lubrication of fluid turbine gearbox during idling or loss of electric grid US Patent 90860552015 B2 General Electric United State Granted citations-18
- Prabhakar Neti, Manoj R Shah, Karim Younsi, Mayank Tiwari, Pinjia Zhang Fault Detection Based on Current Signature Analysis for a Generator US Patent 89943592015 B2 General Electric United States Granted citations-15
- PR Subramaniam, R Armbruster, M Tiwari, GV Rao, K Ramasamy Lubricant supply system and method for controlling gearbox lubrication US App. 13/069,587,2012 General Electric United States Published citations-12
- Mayank Tiwari, Ramasamy Anbarasu, Mohamed Osama, Gerald Burt Kliman Axial Flux Motor Driven Anode Target for X-Ray Tube US Patent 6,873,683 B2 General Electric United States Granted citations-4
- Harith Vadari, MR Sridhar, Mayank Tiwari Liquid cooled Bearing Housing with Grease Lubricated Rotating Anode Bearing for an X-Ray tube US Patent 7,113 568 B2 General Electric United States Granted citations-4
- Harith Vadari, Ram Turaga, Mayank Tiwari, Hombe Gowda, ME Vermilyea, Frederic Dahan, Thomas Saint Martin System and Method for Providing Sealing Arrangement in a X-Ray tube US Patent7,245,700 General Electric United States Granted citations-3
- Mayank Tiwari, Nikhil Tambe, Prasad Joshi Textured Surfaces for Gears US2009A139799A1, 2009 General Electric United States Published citations-3
- M Tiwari, L Cretegny, Y Liu, BS Parthasarathy, R Agrawal, Y Wu Method for repairing component US Patent 9,517,521,2016 General Electric United State Granted citations-1
- DAHAN Fredric, SAINT MARTIN Thomas, JOSSE JEAN Luc, Tiwari Mayank, SRIDHAR Mandyam Rangyan, Bhattacharyya Kingshook X-ray tube provided with an advanced bearing cartridge and manufacturing process France 2879809(A1) General Electric France Granted
- DAHAN Fredric,VADARI Harith,Tiwari Mayank,SAINT MARTIN Thomas,LACHERADE Xavier Armand, JOSSE JEAN Luc X-ray tube with a mechanical bearing including an advanced seal and mounting process France 2893759(A1) General Electric France Granted
- Mayank Tiwari,Raju Gupta,Vitthal Pandey,Pranay Kumar,Neetesh Kumar An Improved System Of A Passive Exoskeleton To Reduce Manual Effort In Carrying Load India 201731023607 A IIT Patna India Published
|
Designs |
- Mayank Tiwari,Raju Gupta,Vitthal Pandey,Pranay Kumar,Neetesh Kumar,IIT Patna Exoskeleton India Design287479, 2019 India Design Granted
- Mayank Tiwari, Raju Gupta, Avinash Kumar, Knp Rajasekhas, Rk Meena,IIT Patna Hand Operated Dirt and Soil Collector India Design 272013, 2017 India Design Granted
|
Publications |
Journal Publications:
- Tiwari, M., Gupta, K., Prakash, O. “Effect of radial internal clearance of a ball bearing on the dynamics of a balanced horizontal rotor,” Journal of sound and vibration 2000, 238 (5), 723-756 Impactfactor(2020)-3.123 h-5 (2020)-54 citations-289
- Tiwari, M., Gupta, K., Prakash, O. “Dynamic response of an unbalanced rotor supported on ball bearings” Journal of sound and vibration 2000, 238 (5), 757-779 Impactfactor(2020)-3.123 h-5 (2020)-54 citations-242
- Tiwari, M., Gupta, K., Prakash, O. “Experimental study of a rotor supported by deep groove ball bearing” International Journal of Rotating Machinery 2002, 8 (4), 243-258 CiteScore(2020)-2.1 h-5 (2020)-11 citations-19
- Singh, R., Adiguna, H., Tiwari, M., Tseng, H., Hrovat, D. “Transient response evaluation of a hydraulic engine mount” Sound and vibration 2002,36 (7), 30-35 RG Journal Impact(2019)-0.27 h-5 (2020)-6 citations-3
- Adiguna, H., Tiwari, M., Singh, R., Tseng, H., E., Hrovat, D. “Transient response of a hydraulic engine mount,” Journal of Sound and Vibration 2003, 268 (2), 217-248 Impactfactor(2020)-3.123 h-5 (2020)-54 citations-110
- Tiwari, M., Adiguna, H., Singh, R. “Experimental characterization of a nonlinear hydraulic engine mount” Noise Control Engineering Journal 2003, 51 (1), 36-49 Impactfactor(2020)-0.68 h-5 (2020)-13 citations-40
- O PRAKASH, K Gupta, M Tiwari “Vibration monitoring and analysis to investigate damage to civil structures” Journal of the Institution of Engineers. India. Civil Engineering Division 2003,83,147-152 Impactfactor(2020)-0.39 h-5 (2020)-11
- K Gupta, R Kumar, M Tiwari, O Prakash “Effect of rotary inertia and gyroscopic moments on dynamics of two spool aeroengine rotor” IGTI 1993/Accepted for ASME Journal of Gas Turbine and Power 1993 Impactfactor(2020)-1.653 h-5 (2020)-32 citations-4
- Venkatesham, B., Tiwari, M., Munjal, M., L. “Analytical prediction of the breakout Noise from a rectangular cavity with one compliant wall” The Journal of the Acoustical Society of America 2008, 124 (5), 2952-2962. Impactfactor(2020)-1.819 h-5 (2020)-44 citations-28
- Venkatesham, B., Tiwari, M., Munjal, M., L. “Prediction of Breakout Noise from Acoustically Lagged Rectangular HVAC Ducts,” Building Acoustics 2009, 16 (4), 313-328 CiteScore-2.6 h-5 (2020)- citations-2
- Venkatesham, B., Tiwari, M., Munjal, M., L. “Transmission loss analysis of rectangular expansion chamber with arbitrary location of inlet/outlet by means of Green's functions” Journal of Sound and Vibration 2009, 323 (3-5), 1032-1044 Impactfactor(2020)-3.123 h-5 (2020)-54 citations-46
- Venkatesham, B., Tiwari, M., Munjal, M., L. “Analytical prediction of break-out noise from a reactive rectangular plenum with four flexible walls,” The Journal of the Acoustical Society of America 2010, 128 (4), 1789-1799 Impactfactor(2020)-1.819 h-5 (2020)-44 citations-23
- Venkatesham, B., Tiwari, M., Munjal, M., L. “Prediction of Breakout Noise from a Rectangular Duct with Compliant Walls,” International Journal of Acoustics & Vibration 2011,16(4) Impactfactor(2020)-0.725 h-5 (2020)-9 citations-16
- Tiwari, M., B., Venkatesham., “Effect of micro-pitting on gear vibrations and dynamic excitation source,” Journal of vibration engineering & technologies 2014, 2(1), 53-58 Impactfactor(2020)-0.325 h-5 (2020)-11 citations-3
- Prajapati, D., K., and Tiwari, M. "Use of artificial neural network (ANN) to determining surface parameters, friction and wear during pin-on-disc tribotesting" Key Engineering Materials 2017, 739, 87-95 Impactfactor(2020)-0.35 h-5 (2020)-23 citations-3
- Prajapati, D., K., and Tiwari, M. “Topography analysis of random anisotropic Gaussian rough surfaces,” ASME Journal of Tribology 2017, 139, 041402 Impactfactor(2020)-1.648 h-5 (2020)-22 citations-10
- Prajapati, D., K., and Tiwari, M. “The Relation between Fractal Signature and Topography Parameters: A Numerical and Experimental Study,” Surface Topography: Metrology and Properties 2018, Vol. 6, 045008 Impactfactor(2020)-1.613 h-5 (2020)-22 citations-3
- Prajapati, D., K., Tiwari, M. 3D numerical wear model for determining the change in surface topography Surface Topography: Metrology and Properties 2018,6,045006 Impactfactor(2020)-1.613 h-5 (2020)-22 citations-4
- Prajapati, D., K., and Tiwari, M. “Investigation on Metallic Contact Conditions Using ECR Technique by Performing Rolling/Sliding Experiments,” Surface Topography: Metrology and Properties 2019, Vol. 7, 015015 Impactfactor(2020)-1.613 h-5 (2020)-22
- Prajapati, D., K., Kumar, S., Tiwari, M. “Tribological Investigation of Copper and AISI 304 Steel during Dry Sliding Wear,” Surface Topography: Metrology and Properties 2019, Vol. 7, 015021 Impactfactor(2020)-1.613 h-5 (2020)-22 citations-3
- DK Prajapati, M Tiwari Assessment of topography parameters during running-in and subsequent rolling contact fatigue tests Journal of Tribology 2019,141 (5) Impactfactor(2020)-1.648 h-5 (2020)-22 citations-3
- Prajapati, D., K., and Tiwari, M. “Effect of Correlation Length, Surface Roughness, and Load on Friction Coefficient Under Mixed Lubrication Regime,” Lubrication Science 2019, 31 (5), 218-228 Impactfactor(2020)-1.682 h-5 (2020)-15
- Prajapati, D., K., and Tiwari, M. “Experimental Investigation on Evolution of Surface Damage and Topography Parameters during Rolling Contact Fatigue Tests,” Fatigue &Fracture of Engineering Materials & Structures 2019,DOI:10.1111/ffe.13150 Impactfactor(2020)-3.033 h-5 (2020)-34 citations-1
- Singh, Krishnamurti; Tiwari, Mayank; Mahato, Anirban; Evolution of regimes of wear in zircaloy-4/inconel-600 contact subjected to fretting loading Tribology International 2020, 106274 Impactfactor(2020)-4.271 h-5 (2020)-54
- Prajapati, D., K., Tiwari, M. . “Experimental analysis of contact fatigue damage using fractal methodologies,” Wear 2020, 450-451, 203262 Impactfactor(2020)-4.1 h-5 (2020)-47
- Prajapati, D., K., and Tiwari, M. “The Correlation between Friction Coefficient and Areal Topography: An Experimental Study,” Friction 2019 Impactfactor(2020)-5.29 h-5 (2020)-22
- Singh, Rahul Kumar; Tiwari, Mayank; Saksena, Anpeksh Ambreesh; Srivastava, Aman; “Analysis of a Compact Squeeze Film Damper with Magneto Rheological Fluid” Defence Science Journal 2020,122,70-2 Impactfactor(2020)-0.589 h-5 (2020)-15
- Kumar, Ritesh; Pathak, Himanshu; Singh, Akhilendra; Tiwari, Mayank; “Modeling of crack repair using piezoelectric material: XFEM approach” Engineering Computations 2020 ,https://www.emerald.com/insight/content/doi/10.1108/EC-01-2020-0001/full/pdfImpactfactor(2020)-4.271 h-5 (2020)-54
- Kumar, Ritesh; Singh, Akhilendra; Tiwari, Mayank; “Investigation of Crack Repair in Orthotropic Composite by Piezoelectric Patching” Materials Today: Proceedings 2020, 1303-1312,21 Impactfactor(2020)-0.97 h-5 (2020)-42
- Kumar Ritesh , Singh Akhilendra, Tiwari Mayank “Investigation of crack repair using piezoelectric material under thermo-mechanical loading” Journal of Intelligent Material Systems and Structures 2020,https://doi.org/10.1177/1045389X20943946Impactfactor(2020)-2.41 h-5 (2020)-37
|
Conference |
- M.Tiwari, K.Gupta, Om Prakash Nonlinear Dynamic analysis of a Rigid Rotor supported on a Deep Groove Ball Bearing Proceedings of the 7th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 1998/2,960-969 , citations-7
- R. Singh, H. Adiguna, M.Tiwari, H. Tseng, D. HrovatTransient Response Of A Hydraulic Engine Mount INTER-NOISE and NOISE-CON 2002 (5),1020-1028
- Matthew S. Young Mayank Tiwari Rajendra Singh Identification of a Joint Stiffness Matrix Using a Decomposition Technique IMAC2007 2007 , citations- 2
- B. Venkatesham1, M. L. Munjal and Mayank Tiwari Prediction Of Break-Out Noise Of A Rectangular Hvac Duct With Acoustic Lagging
- Sampath Srinidhi, Mayank Tiwari, Rajni Burra, Hombe Gowda, Paul Seimers Bearing Wear under Mechanical Stresses and Electrical Currents ASM/STLE Joint Conference on Tribology 2009,499-502 , citations- 3
- Mayank Tiwari, KGupta, Om Prakash Phenomena of Intermittency in machine components 2008,2042-2049
- B. Venkatesham, Mayank Tiwari, and M. L. Munjal Free Vibration analysis of Coupled Acoustic-Structural Systems 2008 , citations- 3
- Gaurav Pandey, B. Venkatesham, Mayank Tiwari Plastic Gear Transmission Error Calculation IUTAM: IUROTOR-2009
- B. Venkatesham, Mayank Tiwari and V. Aishwarya Effect of Micro-Pitting on Gear Vibrations and Dynamic ExCitations Source VETOMAC-VI pp.99-105, December 2010
- K Singh, M Tiwari, A Mahato Fretting wear characteristics of AISI 1040 steel alloy Proceedings of Asia International Conference on Tribology 2018,240-241 , citations- 1
- K Gupta, R Kumar, M Tiwari, O Prakash Effect of rotary inertia and gyroscopic moments on dynamics of two spool aeroengine rotor ASME:International Gas Turbine and Aeroengine Congress and Exposition 1993 , citations- 4
- ML Munjal, B Venkatesham, Mayank Tiwari Four-Pole Parameters of a Rectangular Expansion Chamber with Yielding Walls Proc. 16th Intl. Congress on Sound and Vibration 2009 , citations- 1
- Deepak K Prajapati, Mayank Tiwari 2D numerical wear model for determining change in surface topography with number of wear cycles Proceedings of Asia International Conference on Tribology 2018,233-234
- Nikhil Kaushik, Mayank Tiwari Sridhar, Kaushik Bhattacharya Simulation of Rolling Element Bearing Using Multi-Body Dynamic Approach and Simple Test Method to Measure IPROMM-2005 2005 369
|
Awards & Honours |
- GE Six Sigma Black Belt 2006
- Independent Evaluator of PhD thesis on Modelling Gear Friction for Presidential Scholarship of the Ohio State University 2007, Mechanical Engineering Department, Ohio State University USA
- University GE interaction leader for IIT Delhi
- GE Patents and Publications Award 2010
- GE Plastics Team Excellence Award
- GE Health Care Chairman’s Leadership Award
- Nominated to the Executive Society of Tribology Society of India
- Reviewer for Journal of Sound and Vibration, Transactions of ASME, Mechanisms and Machine Theory, Journal of Vibration (Vibration Institute of India)
- Merit Scholarship in BE
- Best paper award in ICIT Tribology Conference 2010, Steel Authority of India, Ranchi
- Appreciation from CAO Indian Railways for technical solutions to Wheel Plant Bela, Bihar
|
Member of Professional bodies |
Life Member Tribology Society of India ASME |
Books |
Chapter- Evolution of Surface Topography During Wear Process, DK Prajapati and Mayank Tiwari, Book- Tribology in Materials and Applications, ISBN: 978-3-030-47451-5, Springer |
Sl. No. | Name of Training | Organization where training was received | Year |
1 |
Material Test System 831.05 |
Mechanical Testing Systems, Minnesota, Minneapolis, USA |
2000 |
2 |
Bearing Design |
American Bearing Manufacturers Association,Pennsylvania State University, USA |
2003 |
3 |
Essentials of Leadership, Hiring Skills, Business Finance |
GE Corporate,Bangalore |
2004 |
4 |
New Managers Development Course |
GE Corporate, Hyderabad |
2007 |
5 |
Advanced Managers Course |
GE Corporate, Munich Germany |
2010 |
|
Other |
Working on projects on Magnetic gearbox and Exoskeleton |