Publications

SN SCI Publication
1 Pathak, H., Singh, A., Singh, I.V. and Yadav, S.K., 2013. A simple and efficient XFEM approach for 3-D cracks simulations. International Journal of Fracture181(2), pp.189-208.
2 Pathak, H., Singh, A. and Singh, I.V., 2013. Fatigue crack growth simulations of 3-D problems using XFEM. International Journal of Mechanical Sciences76, pp.112-131.
3 Hassan, M.A., Pathak, M. and Khan, M.K., 2013. Natural convection of viscoplastic fluids in a square enclosure. Journal of Heat Transfer135(12), p.122501.
4 Pathak, M. and Khan, M.K., 2013. Inter-phase slip velocity and turbulence characteristics of micro particles in an obstructed two-phase flow. Environmental fluid mechanics13(4), pp.371-388.
5 Khan, M.K., Pathak, M., Deo, A.K. and Singh, R., 2013. Burst criterion for zircaloy-4 fuel cladding in an inert environment. Nuclear Engineering and Design265, pp.886-894.
6 Adera, S., Raj, R., Enright, R. and Wang, E.N., 2013. Non-wetting droplets on hot superhydrophilic surfaces. Nature communications, 4, p.2518.
7 Pathak, H., Singh, A. and Singh, I.V., 2014. Fatigue crack growth simulations of homogeneous and bi-material interfacial cracks using element free Galerkin method. Applied Mathematical Modelling, 38(13), pp.3093-3123.
8 Thakur, A., Chowdhury, S., Švec, P., Wang, C., Losert, W. and Gupta, S.K., 2014. Indirect pushing based automated micromanipulation of biological cells using optical tweezers. The International Journal of Robotics Research33(8), pp.1098-1111.
9 Chowdhury, S., Thakur, A., Svec, P., Wang, C., Losert, W. and Gupta, S.K., 2014. Automated manipulation of biological cells using gripper formations controlled by optical tweezers. IEEE Transactions on Automation Science and Engineering, 11(2), pp.338-347.
10 Švec, P., Thakur, A., Raboin, E., Shah, B.C. and Gupta, S.K., 2014. Target following with motion prediction for unmanned surface vehicle operating in cluttered environments. Autonomous Robots, 36(4), pp.383-405.
11 Anand, R.S. and Patra, K., 2014. Modeling and simulation of mechanical micro-machining—A review. Machining Science and Technology18(3), pp.323-347.
12 Khan, M.K. and Pathak, M., 2014. Ballooning deformation of Zircaloy-4 fuel sheath. Journal of Pressure Vessel Technology136(3), p.031206.
13 Khan, M.K., Pathak, M., Suman, S., Deo, A. and Singh, R., 2014. Burst investigation on zircaloy-4 claddings in inert environment. Annals of Nuclear Energy69, pp.292-300.
14 Raj, R., Adera, S., Enright, R. and Wang, E.N., 2014. High-resolution liquid patterns via three-dimensional droplet shape control. Nature communications, 5, p.4975.
15 Raj, R., Adera, S. and Wang, E.N., 2014. Polygonal Droplets on Microstructured Surfaces. Journal of Heat Transfer, 136(8), p.080906.
16 Pandey, R.K. and Panda, S.S., 2014. Optimization of bone drilling parameters using grey-based fuzzy algorithm. Measurement47, pp.386-392.
17 Pandey, R.K. and Panda, S.S., 2014. Modelling and optimization of temperature in orthopaedic drilling: An in vitro study. Acta of bioengineering and biomechanics16(1).
18 Tauheed, F. and Sarangi, S., 2014. Damage-induced stress-softening and viscoelasticity of limited elastic materials. Mechanics of Time-Dependent Materials18(3), pp.493-525.
19 Pathak, H., Singh, A., Singh, I.V. and Brahmankar, M., 2015. Three-dimensional stochastic quasi-static fatigue crack growth simulations using coupled FE-EFG approach. Computers & Structures160, pp.1-19.
20 Patra, K., Anand, R.S., Steiner, M. and Biermann, D., 2015. Experimental analysis of cutting forces in microdrilling of austenitic stainless steel (X5CrNi18-10). Materials and Manufacturing Processes30(2), pp.248-255.
21 Sahu, R., Patra, K. and Szpunar, J., 2015. Experimental study and numerical modelling of creep and stress relaxation of dielectric elastomers. Strain51(1), pp.43-54.
22 Patra, K. and Sahu, R.K., 2015. A visco-hyperelastic approach to modelling rate-dependent large deformation of a dielectric acrylic elastomer. International Journal of Mechanics and Materials in Design11(1), pp.79-90.
23 Prajapati, Y.K., Pathak, M. and Khan, M.K., 2015. Computational Fluid Dynamics Modeling of Two-Phase Flow in an Adiabatic Capillary Tube. Journal of Thermal Science and Engineering Applications7(1), p.011006.
24 Hassan, M.A., Pathak, M. and Khan, M.K., 2015. Rayleigh–Benard convection in Herschel–Bulkley fluid. Journal of Non-Newtonian Fluid Mechanics226, pp.32-45.
25 Hassan, M.A., Pathak, M. and Khan, M.K., 2015. Thermorheological Characterization of Elastoviscoplastic Carbopol Ultrez 20 Gel. Journal of Engineering Materials and Technology137(3), p.031002.
26 Prajapati, Y.K., Pathak, M. and Khan, M.K., 2015. A comparative study of flow boiling heat transfer in three different configurations of microchannels. International Journal of Heat and Mass Transfer85, pp.711-722.
27 Suman, S., Khan, M.K., Pathak, M., Singh, R.N. and Chakravartty, J.K., 2015. Hydrogen in Zircaloy: Mechanism and its impacts. International journal of hydrogen energy40(17), pp.5976-5994.
28 Pandey, R.K. and Panda, S.S., 2015. Optimization of bone drilling using Taguchi methodology coupled with fuzzy based desirability function approach. Journal of Intelligent Manufacturing26(6), pp.1121-1129.
29 Pandey, R.K. and Panda, S.S., 2015. Evaluation of delamination in drilling of bone. Medical engineering & physics37(7), pp.657-664.
30 Tauheed, F. and Sarangi, S., 2015. Rheological model for stress-softened visco-hyperelastic materials. International Journal of Damage Mechanics24(5), pp.728-749.
31 Bhattacharyya, R., Sarangi, S. and Samantaray, A.K., 2015. Effect of stress-softening on the ballooning motion of hyperelastic strings. International Journal of Engineering Science96, pp.19-33.
32 Prakash, S. and Kumar, S., 2015. Profile and depth prediction in single-pass and two-pass CO2 laser microchanneling processes. Journal of Micromechanics and Microengineering25(3), p.035010.
33 Prakash, S. and Kumar, S., 2015. Fabrication of microchannels on transparent PMMA using CO 2 Laser (10.6 μm) for microfluidic applications: An experimental investigation. International Journal of Precision Engineering and Manufacturing16(2), pp.361-366.
34 Mandal, S., Kumar, S., Bhargava, P., Premsingh, C.H., Paul, C.P. and Kukreja, L.M., 2015. An experimental investigation and analysis of PTAW process. Materials and Manufacturing Processes30(9), pp.1131-1137.
35 Suman, S., Khan, M.K. and Pathak, M., 2015. Performance enhancement of solar collectors—A review. Renewable and Sustainable Energy Reviews, 49, pp.192-210.
36 Pathak, H., Singh, A. and Singh, I.V., 2016. Three-dimensional quasi-static interfacial crack growth simulations in thermo-mechanical environment by coupled FE-EFG approach. Theoretical and Applied Fracture Mechanics86, pp.267-283.
37 Kumar, S., Singh, I.V., Mishra, B.K. and Singh, A., 2016. New enrichments in XFEM to model dynamic crack response of 2-D elastic solids. International Journal of Impact Engineering, 87, pp.198-211.
38 Raj, A. and Thakur, A., 2016. Fish-inspired robots: design, sensing, actuation, and autonomy—a review of research. Bioinspiration & biomimetics11(3), p.031001.
39 Sagapuram, D., Viswanathan, K., Mahato, A., Sundaram, N.K., M'Saoubi, R., Trumble, K.P. and Chandrasekar, S., 2016. Geometric flow control of shear bands by suppression of viscous sliding. Proc. R. Soc. A, 472(2192), p.20160167.
40 Sahu, R.K. and Patra, K., 2016. Rate-dependent mechanical behavior of VHB 4910 elastomer. Mechanics of Advanced Materials and Structures23(2), pp.170-179.
41 Sahu, R.K., Saini, A., Ahmad, D., Patra, K. and Szpunar, J., 2016. Estimation and validation of maxwell stress of planar dielectric elastomer actuators. Journal of Mechanical Science and Technology30(1), pp.429-436.
42 Prajapati, Y.K., Pathak, M. and Khan, M.K., 2016. Transient heat transfer characteristics of segmented finned microchannels. Experimental Thermal and Fluid Science79, pp.134-142.
43 Prajapati, Y.K., Pathak, M. and Khan, M.K., 2016. Clogging behavior of an elongated bubble in uniform and diverging microchannel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science230(11), pp.1861-1875.
44 Suman, S., Khan, M.K., Pathak, M., Singh, R.N. and Chakravartty, J.K., 2016. Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident. Nuclear Engineering and Design307, pp.319-327.
45 Nirala, C.K. and Saha, P., 2016. Evaluation of μEDM-drilling and μEDM-dressing performances based on online monitoring of discharge gap conditions. The International Journal of Advanced Manufacturing Technology85(9-12), pp.1995-2012.
46 Nirala, C.K. and Saha, P., 2016. A New Approach of Tool Wear Monitoring and Compensation in RµEDM Process. Materials and Manufacturing Processes31(4), pp.483-494.
47 Adera, S., Antao, D., Raj, R. and Wang, E.N., 2016. Design of micropillar wicks for thin-film evaporation. International Journal of Heat and Mass Transfer101, pp.280-294.
48 Raza, M.Q., Kumar, N. and Raj, R., 2016. Surfactants for bubble removal against buoyancy. Scientific reports6, p.19113.
49 Antao, D.S., Adera, S., Farias, E., Raj, R. and Wang, E.N., 2016. Visualization of the evaporating liquid-vapor interface in micropillar arrays. Journal of Heat Transfer138(2), p.020910.
50 Antao, D.S., Adera, S., Zhu, Y., Farias, E., Raj, R. and Wang, E.N., 2016. Dynamic evolution of the evaporating liquid–vapor interface in micropillar arrays. Langmuir32(2), pp.519-526.
51 Verma, A.K., Sarangi, S. and Kolekar, M., 2016. Misalignment faults detection in an induction motor based on multi-scale entropy and artificial neural network. Electric Power Components and Systems44(8), pp.916-927.
52 Prakash, S. and Kumar, S., 2016. Experimental and theoretical analysis of defocused CO2 laser microchanneling on PMMA for enhanced surface finish. Journal of Micromechanics and Microengineering27(2), p.025003.
53 Mandal, S., Kumar, S., Bhargava, P. and Paul, C.P., 2016. Analysis of Discontinuous Bead Formation by PTAW Process. Materials and Manufacturing Processes31(16), pp.2181-2185.
54 Kumar, M., Roy, S. and Ali, M.S., 2016. An efficient immersed boundary algorithm for simulation of flows in curved and moving geometries. Computers & Fluids129, pp.159-178.
55 Kumar, M. and Roy, S., 2016. A sharp interface immersed boundary method for moving geometries with mass conservation and smooth pressure variation. Computers & Fluids137, pp.15-35.
56 Kumar, M. and Roy, S., 2016. Immersed boundary method simulation of natural convection over fixed and oscillating cylinders in square enclosure. International Journal of Heat and Fluid Flow61, pp.407-424.
57 Siddapureddy, S., Wehrstedt, K.D. and Prabhu, S.V., 2016. Heat transfer to bodies engulfed in di-tert-butyl peroxide pool fires-Numerical simulations. Journal of Loss Prevention in the Process Industries44, pp.204-211.
58 Kumar, P. and Singh, A., 2017. Investigation of Mechanical Properties and Fracture Simulation of Solution-Treated AA 5754. Journal of Materials Engineering and Performance26(10), pp.4689-4706.
59 Gundupalli, S.P., Hait, S. and Thakur, A., 2017. Multi-material classification of dry recyclables from municipal solid waste based on thermal imaging. Waste Management, 70, pp.13-21.
60 Jakhar, K., Chattopadhyay, A., Thakur, A. and Raj, R., 2017. Spline Based Shape Prediction and Analysis of Uniformly Rotating Sessile and Pendant Droplets. Langmuir33(22), pp.5603-5612.
61 Gundupalli, S.P., Hait, S. and Thakur, A., 2017. A review on automated sorting of source-separated municipal solid waste for recycling. Waste management, 60, pp.56-74.
62 Yeung, H., Viswanathan, K., Udupa, A., Mahato, A. and Chandrasekar, S., 2017. Sinuous Flow in Cutting of Metals. Physical Review Applied8(5), p.054044.
63 Sundaram, N.K., Mahato, A., Guo, Y., Viswanathan, K. and Chandrasekar, S., 2017. Folding in metal polycrystals: Microstructural origins and mechanics. Acta Materialia140, pp.67-78.
64 Mahato, A., Yeung, H., Guo, Y., Viswanathan, K., Sundaram, N.K., Udupa, A., Mann, J.B. and Chandrasekar, S., 2017. Sinuous flow and folding in metals: Implications for delamination wear and surface phenomena in sliding and cutting. Wear376, pp.1534-1541.
65 Garg, A. and Bhattacharya, A., 2017. Similar and dissimilar joining of AA6061-T6 and copper by single and multi-spot friction stirring. Journal of Materials Processing Technology250, pp.330-344.
66 Garg, A., Bhattacharya, A. and Batish, A., 2017. Effect of cold vapour treatment on geometric accuracy of fused deposition modelling parts. Rapid Prototyping Journal23(6), pp.1226-1236.
67 Garg, A. and Bhattacharya, A., 2017. On lap shear strength of friction stir spot welded AA6061 alloy. Journal of Manufacturing Processes26, pp.203-215.
68 Garg, A. and Bhattacharya, A., 2017. An insight to the failure of FDM parts under tensile loading: finite element analysis and experimental study. International Journal of Mechanical Sciences120, pp.225-236.
69 Garg, A., Bhattacharya, A. and Batish, A., 2017. Chemical vapor treatment of ABS parts built by FDM: Analysis of surface finish and mechanical strength. The International Journal of Advanced Manufacturing Technology89(5-8), pp.2175-2191.
70 Kumar, S., Batish, A., Singh, R. and Bhattacharya, A., 2017. Effect of cryogenically treated copper-tungsten electrode on tool wear rate during electro-discharge machining of Ti-5Al-2.5 Sn alloy. Wear386, pp.223-229.
71 Bera, T.K., Dixit, S., Bhattacharya, A., Kumar, D. and Samantaray, A.K., 2017. Thermal modelling, simulation and experimental validation of heat accumulation in a framed glass cabin. Journal of Theoretical and Applied Mechanics55(3), pp.911-922.
72 Bhattacharya, A. and Singla, S., 2017. Mechanical Properties and Metallurgical Characterization of Dissimilar Welded Joints between AISI 316 and AISI 4340. Transactions of the Indian Institute of Metals70(4), pp.893-901.
73 Bhattacharya, A. and Singla, S., 2017. Dissimilar GTAW between AISI 304 and AISI 4340 steel: Multi-response optimization by analytic hierarchy process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering231(4), pp.824-835.
74 Garg, A. and Bhattacharya, A., 2017. Strength and failure analysis of similar and dissimilar friction stir spot welds: influence of different tools and pin geometries. Materials & Design127, pp.272-286.
75 Anand, R.S., Patra, K., Steiner, M. and Biermann, D., 2017. Mechanistic modeling of micro-drilling cutting forces. The International Journal of Advanced Manufacturing Technology88(1-4), pp.241-254.
76 Pashnyov, V.A., Pimenov, D.Y., Erdakov, I.N., Koltsova, M.S., Mikolajczyk, T. and Patra, K., 2017. Modeling and analysis of temperature distribution in the multilayer metal composite structures in grinding. The International Journal of Advanced Manufacturing Technology91(9-12), pp.4055-4068.
77 Pimenov, D.Y., Guzeev, V.I., Mikolajczyk, T. and Patra, K., 2017. A study of the influence of processing parameters and tool wear on elastic displacements of the technological system under face milling. The International Journal of Advanced Manufacturing Technology92(9-12), pp.4473-4486.
78 Raj, S., Pathak, M. and Khan, M.K., 2017. An analytical model for predicting growth rate and departure diameter of a bubble in subcooled flow boiling. International Journal of Heat and Mass Transfer109, pp.470-481.
79 Prajapati, Y.K., Pathak, M. and Khan, M.K., 2017. Bubble dynamics and flow boiling characteristics in three different microchannel configurations. International Journal of Thermal Sciences112, pp.371-382.
80 Suman, S., Khan, M.K., Pathak, M. and Singh, R.N., 2017. Effects of hydrogen on thermal creep behaviour of Zircaloy fuel cladding. Journal of Nuclear Materials.
81 Suman, S., Khan, M.K., Pathak, M. and Singh, R.N., 2017. Investigation of elevated-temperature mechanical properties of δ-hydride precipitate in Zircaloy-4 fuel cladding tubes using nanoindentation. Journal of Alloys and Compounds726, pp.107-113.
82 Suman, S., Khan, M.K., Pathak, M. and Singh, R.N., 2017. 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM. International Journal of Hydrogen Energy42(29), pp.18668-18673.
83 Thakur, D.S., Khan, M.K. and Pathak, M., 2017. Solar air heater with hyperbolic ribs: 3D simulation with experimental validation. Renewable Energy113, pp.357-368.
84 Thakur, D.S., Khan, M.K. and Pathak, M., 2017. Performance evaluation of solar air heater with novel hyperbolic rib geometry. Renewable energy105, pp.786-797.
85 Nirala, C.K. and Saha, P., 2017. Precise μEDM-drilling using real-time indirect tool wear compensation. Journal of Materials Processing Technology240, pp.176-189.
86 Nirala, C.K. and Saha, P., 2017. Toward development of a new online tool wear compensation strategy in micro-electro-discharge machining drilling. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture231(4), pp.588-599.
87 Gunjan, M.R. and Raj, R., 2017. Dynamic Roughness Ratio-Based Framework for Modeling Mixed Mode of Droplet Evaporation. Langmuir33(28), pp.7191-7201.
88 Kumar, A. and Raj, R., 2017. Droplets on microdecorated surfaces: evolution of the polygonal contact line. Langmuir33(19), pp.4854-4862.
89 Kumar, P. and Panda, S.S., 2017. Numerical simulation of Al1070 alloy through hybrid SPD process. The International Journal of Advanced Manufacturing Technology91(1-4), pp.835-846.
90 Kumar, M., Roy, S. and Panda, S.S., 2017. Numerical simulation of continuous casting of steel alloy for different cooling ambiences and casting speeds using immersed boundary method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture231(8), pp.1363-1378.
91 Arya, K. and Sarangi, S., 2017. Effect of damage on the free radial oscillations of an incompressible isotropic tube. Mathematics and Mechanics of Solids, p.1081286517712076.
92 Paul, S.K., Roy, S., Sivaprasad, S., Bar, H.N. and Tarafder, S., 2017. Local Ratcheting Response in Dissimilar Metal Weld Joint: Characterization Through Digital Image Correlation Technique. Journal of Materials Engineering and Performance, 26(10), pp.4953-4963.
93 Prajapati, D.K. and Tiwari, M., 2017. Topography Analysis of Random Anisotropic Gaussian Rough Surfaces. Journal of Tribology139(4), p.041402.
94 Kumar, M., Roy, S. and Panda, S.S., 2017. Numerical simulation of continuous casting of steel alloy for different cooling ambiences and casting speeds using immersed boundary method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture231(8), pp.1363-1378.
95 Sarkar, D., Upadhyay, N., Roy, S. and Rana, S.C., 2017. Immersed boundary simulation of flow through arterial junctions. Sādhanā42(4), pp.533-541.
96 Siddapureddy, S. and Prabhu, S.V., 2017. Experimental and numerical simulation studies on heat transfer to calorimeters engulfed in diesel pool fires. Journal of Fire Sciences35(2), pp.156-176.
97 Deepu, P., Peng, C. and Moghaddam, S., 2018. Dynamics of ultrasonic atomization of droplets. Experimental Thermal and Fluid Science92, pp.243-247.
98 Anand, R.S. and Patra, K., 2018. Cutting force and hole quality analysis in micro-drilling of CFRP. Materials and Manufacturing Processes33(12), pp.1369-1377.
99 Pratap, T. and Patra, K., 2018. Micro ball-end milling—an emerging manufacturing technology for micro-feature patterns. The International Journal of Advanced Manufacturing Technology94(5-8), pp.2821-2845.
100 Pratap, T. and Patra, K., 2018. Fabrication of micro-textured surfaces using ball-end micromilling for wettability enhancement of Ti-6Al-4V. Journal of Materials Processing Technology262, pp.168-181.
101 Sood, T., Roy, S. and Pathak, M., 2018. Effect of pulse rate variation on blood flow through axisymmetric and asymmetric stenotic artery models. Mathematical biosciences298, pp.1-18.
102 Gouda, R.K., Pathak, M. and Khan, M.K., 2018. Pool boiling heat transfer enhancement with segmented finned microchannels structured surface. International Journal of Heat and Mass Transfer127, pp.39-50.
103 Reddy, D.S., Khan, M.K., Alam, M.Z. and Rashid, H., 2018. Design charts for Scheffler reflector. Solar Energy163, pp.104-112.
104 Suman, S., Khan, M.K., Pathak, M. and Singh, R.N., 2018. Effects of δ-hydride precipitated at a crack tip on crack instability in Zircaloy-4. International Journal of Energy Research42(1), pp.284-292.
105 Ahmed, S. and Saha, P., 2018. Development and testing of fixtures for friction stir welding of thin aluminium sheets. Journal of Materials Processing Technology252, pp.242-248.
106 Kumar, N., Raza, M.Q. and Raj, R., 2018. Surfactant aided bubble departure during pool boiling. International Journal of Thermal Sciences131, pp.105-113.
107 Raza, M.Q., Kumar, N. and Raj, R., 2018. Wettability-independent critical heat flux during boiling crisis in foaming solutions. International Journal of Heat and Mass Transfer126, pp.567-579.
108 Kumar, N., Raza, M.Q., Seth, D. and Raj, R., 2018. Aqueous ionic liquid solutions for boiling heat transfer enhancement in the absence of buoyancy induced bubble departure. International Journal of Heat and Mass Transfer122, pp.354-363.
109 Ghosh, D.P., Sharma, D., Mohanty, D., Saha, S.K. and Raj, R., 2018. Facile Fabrication of Nanostructured Microchannels for Flow Boiling Heat Transfer Enhancement. Heat Transfer Engineering, pp.1-12.
110 Kumar, P. and Panda, S.S., 2018. An innovative method to join two polymer rods through Y-shape extrusion channel. Measurement119, pp.270-282.
111 Garg, A., Shankhwar, K., Jiang, D., Vijayaraghavan, V., Panda, B.N. and Panda, S.S., 2018. An evolutionary framework in modelling of multi-output characteristics of the bone drilling process. Neural Computing and Applications29(11), pp.1233-1241.
112 Kumar, C. and Sarangi, S., 2018. Dynamic response of an unbalanced rigid rotor bearing system with a nonlinear hydrodynamic force. Journal of Computational and Nonlinear Dynamics13(9), p.090909.
113 Arya, K. and Sarangi, S., 2018. The effect of damage on small-amplitude radial oscillations of an incompressible isotropic tube under pressure. European Journal of Mechanics-A/Solids68, pp.25-37.
114 Prakash, S. and Kumar, S., 2018. Pulse smearing and profile generation in CO 2 laser micromachining on PMMA via raster scanning. Journal of Manufacturing Processes31, pp.116-123.
115 Paul, S.K., Roy, S., Sivaprasad, S. and Tarafder, S., 2018. Forming limit diagram generation from in-plane uniaxial and notch tensile test with local strain measurement through digital image correlation. Physical Mesomechanics21(4).
116 Paul, S.K., 2018. Effect of twist boundary angle on deformation behavior of< 1 0 0> FCC copper nanowires. Computational Materials Science150, pp.24-32.
117 Paul, S.K., Kumar, S. and Tarafder, S., Orientation dependent crack tip blunting and crack propagation in a single crystal BCC iron.
118 Paul, S.K., Roy, S., Sivaprasad, S. and Tarafder, S., 2018. A Simplified Procedure to Determine Post-necking True Stress–Strain Curve from Uniaxial Tensile Test of Round Metallic Specimen Using DIC. Journal of Materials Engineering and Performance27(9), pp.4893-4899.
119 Paul, S.K., Stanford, N. and Hilditch, T., 2018. Austenite plasticity mechanisms and their behavior during cyclic loading. International Journal of Fatigue106, pp.185-195.
120 Deepu, P,. 2018. Modeling the production of belly button lint. Scientific Reports, 8:14472
121 Chaitanya, B., Bahadur, V., Thakur, A. D., and Raj, R., 2018, Biomass-gasification-based atomospheric water harvesting in India, Energy, https://doi.org/10.1016/j.energy.2018.09.183